Fresh Air Vent Grille?
i am putting all new interior in my '57. i bought new kick panels with pioneer speakers in them that have the holes pre-cut for the fresh air vents. i have been able to find the cable kit to open and close the vent doors and also the seal kits but i cant find the vent grilles that bolt to the kick panel face. are these being remade and if so, where can i buy them?
|
Re: Fresh Air Vent Grille?
I haven't seen these repopped. Should be a pretty easy junk yard score. I also see them sometimes in the classifieds.
|
Re: Fresh Air Vent Grille?
i think the chances of me finding a 55-57 in a junkyard around here are slim to none unfortunately. i may just have to fabricate something
|
Re: Fresh Air Vent Grille?
|
Re: Fresh Air Vent Grille?
well? there ya go ................good find and post
|
Re: Fresh Air Vent Grille?
2 Attachment(s)
scoveny91. I see that you need some inside vent covers. How about these? They are not for sale. If you are interested send me a PM. They are in good shape. From a 55.
Earl |
Re: Fresh Air Vent Grille?
are you looking at blocking off the fresh air grille?
I saw these the other day. http://www.customlineperformance.com...--no-vent.html |
Re: Fresh Air Vent Grille?
I should have a pair.
|
Re: Fresh Air Vent Grille?
no, i plan on using the vents. i think im going to just fabricate my own grills. im not real crazy about how the stock ones look now that i have seen a pair.
|
Re: Fresh Air Vent Grille?
Where did you get your interior parts? I'm almost ready to start
|
Re: Fresh Air Vent Grille?
i got my procar ralley seats from summit racing. my carpet is from stockinteriors.com. kick panels and mirror are from ecklers. sound deadening is from eastwood (eastwood mat same as dynamat but half the price). kenwood head unit is from amazon. retractable seat belts are from retrobeltusa.com
|
Re: Fresh Air Vent Grille?
Quote:
Mark |
Re: Fresh Air Vent Grille?
Ahhh, I remember I also bought the new kick panels, with the speakers too.
Then the reality check of .....I didn't have the grills either. I just figured right away that I'd make my own. http://i1139.photobucket.com/albums/...pstgipuj9o.jpg I have the benefit of a plasma cutter. http://i1139.photobucket.com/albums/...ps1e75b584.jpg It took some welding and grinding to get the final result. http://i1139.photobucket.com/albums/...psd4317014.jpg Seeing your situation reminded me of my situation, good luck, Jim;) |
All times are GMT -4. The time now is 12:41 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com