3.23's to 3.73 08 4.3L
 

Hi, I have a 2008 4.3 2wd reg cab with 3.23's but I'm planning on going from the stock 245 to 285 tires so I want to get 3.73 or 4.10 gears but which one? And what are the pros and cons? I wouldn't mind the better acceleration either!

Re: 3.23's to 3.73 08 4.3L
 

edited by staff:

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Re: 3.23's to 3.73 08 4.3L
 

I had 285s and 3.73s on my old scsb 4x4 with a 4.3. It was a complete dog. id go 4.10s so the 4.3 can keep up at highway speeds, mine was always hunting between gears going 65-75. and it would go 90mph tops(took about a week to get there too)

Re: 3.23's to 3.73 08 4.3L
 

I am running a set of 265/50/20 tires with a 3.42 geared rear end in my 2011 GMC. This truck also has the 5.3 engine and a 6 speed auto tranny. My highway RPMs are simple 75 MPH = 2000 RPM. This combination works well with the engine.

The change in tires from a 245 to a 285 tire may not make a lot of difference, you did not state what the ratio of the two tires are 55 series, 50 series, 60 series etc.... That number will give a change in the amount of sidewall that you have on the tires and affect your RPMs greatly. Not to mention the acceleration.

For instance a 245/55/17 tire is 27.6" tall and a 285/55/17 tire is 29.3" tall. Are you keeping the ratio the same. A 285/50/17 tire would be 28.2" tall.