66 c10 Rear Cross Sill
Does anyone know where the spot welds should go on the rear cross sill?
|
Re: 66 c10 Rear Cross Sill
Mine was welded on each bed side. did not re-weld when i put the bed back together. This was a fleetside. Others have said no need. Heavy loads probably.
|
Re: 66 c10 Rear Cross Sill
Fleetside rear bed crossmembers were welded to the bedsides. Like 61K10 said, really no reason to weld them unless doing a 100% factory restoration.
|
Re: 66 c10 Rear Cross Sill
Bolts should be tight or the sides will drift out of square, mine did
|
Re: 66 c10 Rear Cross Sill
Somewhat related question, how hard was it to remove the rear cross sill from the bedsides?
|
Re: 66 c10 Rear Cross Sill
Quote:
|
Re: 66 c10 Rear Cross Sill
Fleetside
|
Re: 66 c10 Rear Cross Sill
2 Attachment(s)
My experience is there is a weld across here that can be a pain to get to.
|
Re: 66 c10 Rear Cross Sill
I'm not sure how i forgot about this thread. Thanks for the reply. I'll get the bolts out and then cut away at the weld. i'll try to take some pics.
|
All times are GMT -4. The time now is 08:38 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com