The 1947 - Present Chevrolet & GMC Truck Message Board Network - Master cylinder question for a 1968 c10

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Master cylinder question for a 1968 c10 (https://67-72chevytrucks.com/vboard/showthread.php?t=817318)

mark 68

01-23-2021 06:48 AM

Master cylinder question for a 1968 c10

I’ve got a 1968 Chevy c10 short wide and I swapped to front discs using ccp’s 6370swbk-50e brake kit. I’m using stock drums in the back for now. I was curious about which master cylinder and booster I needed and proportional valve. I’m also running a big block Chevy. Any help and suggestions would be appreciated.
Posted via Mobile Device

young grasshoppa

01-23-2021 10:36 AM

Re: Master cylinder question for a 1968 c10

I ordered this one from Summit that is awaiting installation on my 72, but should fit with no problem. https://www.summitracing.com/parts/l...ckup/year/1972

mark 68

01-23-2021 08:27 PM

Re: Master cylinder question for a 1968 c10

Ive been looking at this one and thinking this is maybe the best way to go.
Posted via Mobile Device

All times are GMT -4. The time now is 07:57 PM.