The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- 67-72 (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=220)

- - Truck Trim locations (https://67-72chevytrucks.com/vboard/showthread.php?t=221881)

Palf70Step

01-04-2007 09:42 PM

Truck Trim locations

5 Attachment(s)

Per request, here are some scans from the assembly manual showing the measurements for the placement of the upper and lower side trim for the fleetside (or wide bed) pickups.

Palf70Step

01-04-2007 09:44 PM

Re: Truck Trim locations

4 Attachment(s)

continued

Palf70Step

01-04-2007 10:30 PM

Re: Truck Trim locations

4 Attachment(s)

Tailgate, Taillights and Cab

krue	01-04-2007 10:53 PM

Re: Truck Trim locations

Thanks Bill.:D

CHYNSPR

01-05-2007 11:15 AM

Re: Truck Trim locations

Has anyone ever figured how to locate the reference lines that the measurements are taken from? I can't find anything that refers to this in the assembly manual.

Billla

01-05-2007 11:18 AM

Re: Truck Trim locations

Quote:

Originally Posted by CHYNSPR (Post 1971744)

Has anyone ever figured how to locate the reference lines that the measurements are taken from? I can't find anything that refers to this in the assembly manual.

That was my question as well - without the reference the measurements don't do a ton of good :(

Palf70Step

01-05-2007 11:38 AM

Re: Truck Trim locations

1 Attachment(s)

Yeah,I overlooked that or just assumed certain things when I was looking up the drawings for others. It has been a while since my engineering classes, but assembly is based off of a 1 inch grid of the cab. I'd have to go measure mine for sure but line 30 would be 30" up from the assembly line floor. Looking at this cab grid, that would make it 25 inches up from the bottom of the lower body line of the rocker.

All times are GMT -4. The time now is 12:48 PM.