Idler/Pitman Arm Torque
 

Does Anyone Have The Torque Value For The Pitman and Idler Arm To The Cross Shaft Where The Tie Rodends Bolt To? Thanks
Posted via Mobile Device

Re: Idler/Pitman Arm Torque
 

tight, then lineup the cotter pin hole

Re: Idler/Pitman Arm Torque
 

From 1970 service manual:
pitman arm to relay rod nut and idler arm to relay rod nut are both 60 ft/lb

Re: Idler/Pitman Arm Torque
 

Thanks Guys. I Also Have 2 fosm Washers. 1 is 1/4 inch and 1 is 1/2 inch. Where do these go. Somewhere on the idler arm or pitman arm?
Posted via Mobile Device

Re: Idler/Pitman Arm Torque
 

Pretty sure there is one between the pitman arm and the cross shaft. I assume the idler arm is the same way.