The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Engine & Drivetrain (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=24)

- - NV 4500 Drive shaft question (https://67-72chevytrucks.com/vboard/showthread.php?t=781379)

carwasher

02-12-2019 09:48 PM

NV 4500 Drive shaft question

I found a 1998 NV4500 with bellhousing, but has a fixed yoke for driveshift, is there a fix to put a standard driveshaft that slips in. (standard 2wd driveshaft)

Thanks for any help

SunSoaked

02-12-2019 11:14 PM

Re: NV 4500 Drive shaft question

Why would you want to? If your not replacing a similar 4500 you're going to have to have a new shaft anyway. The fixed yoke is a better setup. Just get a new shaft with a slip joint and forget it.

sweetk30

02-12-2019 11:32 PM

Re: NV 4500 Drive shaft question

Quote:

Originally Posted by SunSoaked (Post 8464894)

Why would you want to? If your not replacing a similar 4500 you're going to have to have a new shaft anyway. The fixed yoke is a better setup. Just get a new shaft with a slip joint and forget it.

X2 on this .

Captainfab

02-12-2019 11:57 PM

Re: NV 4500 Drive shaft question

X3......

Quote:

Originally Posted by sunsoaked (Post 8464894)

why would you want to? If your not replacing a similar 4500 you're going to have to have a new shaft anyway. The fixed yoke is a better setup. Just get a new shaft with a slip joint and forget it.

mongocanfly

02-13-2019 12:57 AM

Re: NV 4500 Drive shaft question

do I hear 4?......x4......to answer your question ..ive never seen a nv4500 with a slip in yoke...not saying there isn't such a thing ..but ive never seen one
like stated already..your gonna need a new d-shaft anyway

carwasher

02-13-2019 07:59 AM

Re: NV 4500 Drive shaft question

Everyone thanks for the quick response.

Jim

All times are GMT -4. The time now is 05:00 PM.