Blazer front top hold downs
 

Been working on these for a while now. Getting hard to find originals anymore so I took the ones off of my original paint 72 and made some up. Spent the coin to buy the exact size punch for my iron worker for the slotted holes as well. 16 gauge black steel cut, bent and mig welded together. Holes punched, bead blasted smooth in the cabinet. I have been trying to get my powder coating setup going but it is still not ready yet so I went ahead and sprayed self etching primer & 3 coats of satin white urethane on 5 sets to get started. If I get the powder coating going soon I am going to try my luck doing the rest of them that way. Price is the same either way. I test fit every one of them on my Blazer so the hope is they fit everyone's without having to open the holes up any but I can't promise everyone's top sits same as mine.

Will sell each pair at $85 shipped conus
If you want new stainless screws to go with them $93 shipped Conus
If you only need screws they are $11.50 per set shipped conus

EDIT: 5.14.20 I am currently out of screws. I will be ordering more in the near future if the demand returns. I also only have 2 sets of hold downs left and not sure I will be making any more

EDIT:8.26.20 SOLD OUT
.Edit: 7.7.22 have several sets on the shelf

Re: Blazer front top hold downs
 

I’ll take a set no screws. Let me know how to send payment. I have paypal.

Re: Blazer front top hold downs
 

I got excited and posted this a little earlier than I probably should have. I just got done spraying them so let me make sure everything is still good tomorrow before taking any payments. It will be after lunch before I can respond as I have to go out of town early in the morning for a job.

Thanks

Re: Blazer front top hold downs
 

If the interest is there this will be an ongoing thing. I made a template and already paid for the punch. I have 20 sets made up but only painted 5 sets today the rest are still raw at the moment. I might have to go ahead and paint this whole 1st batch and worry about the powder coating on second round.


.

Re: Blazer front top hold downs
 

That's awesome!!! These should sell like hot cakes, LOL.

Re: Blazer front top hold downs
 

Just saw this - I need the screws. Assume $9.50 is for 6 screws? post a picture so we can see how close to the original chromed screws these you have are and PM Paypal info / advise postage or total etc - thanks!

Re: Blazer front top hold downs
 

Sorry for slow response. I have been out of town all morning then found out I won an item at a govt auction and had to go pick that up. Here are pics of the screws. $9.50 is for 6 screws and 6 lock washers all in stainless or $14 for 12/12. These are also the same screws used on the rear seat arm rest brackets

Thanks
Richard

.

Re: Blazer front top hold downs
 

PP is in my signature and I will ship out starting Monday. Want paint to cure good

Re: Blazer front top hold downs
 

If everyone pays that has asked for a set I am already out of the 1st 20 sets. I had no idea they were this needed. Looks like I know what I will be working on over the holidays.

Re: Blazer front top hold downs
 

I get asked a couple of times a week for them, I very needed item!! Now, you need to start making the hatch catches, that's another one I get asked a couple of times a week.

Re: Blazer front top hold downs
 

Been trying but my iron worker is limited and I have not found the trick to getting it rolled without totally effing it up. Have not put a whole lot of time into figuring out the catches just because of the other 103k user tabs I have open in my brain lol. The good thing is I believe the mounting holes are the same punch size. The front hold downs are time consuming but I am getting better at knocking them out.

Re: Blazer front top hold downs
 

Well I’m down for a set for sure so let me know when ready.

Re: Blazer front top hold downs
 

Got your payment and they ship in the morning
Thanks

Re: Blazer front top hold downs
 

I do have some ready to be shipped with or without bolts.

They have all been powder coated at this point. I blasted all the ones I painted originally and powder coated them as well

.

Re: Blazer front top hold downs
 

I still have a couple sets ready to go

Re: Blazer front top hold downs
 

I only have 2 sets left for now

Re: Blazer front top hold downs
 

Will these fit a single wall top?

if so, I need the brackets and screws.

Re: Blazer front top hold downs
 

yes brackets are same for both. My PP is in my signature below

Re: Blazer front top hold downs
 

Got your payment and they will ship this morning.

Re: Blazer front top hold downs
 

This leaves ONE set left available

Re: Blazer front top hold downs
 

Thanks
Posted via Mobile Device

Re: Blazer front top hold downs
 

Need two sets of screws if you have them please.

Les

Re: Blazer front top hold downs
 

Les
PP is in my signature

$9.50 for 6 including shipping & PP fees
$14.00 for 12 including PP & shipping

Thanks
Richard

Re: Blazer front top hold downs
 

Strong work in producing these. Look great.

Re: Blazer front top hold downs
 

Thanks Pete


I am out of powder coated ones for the moment. I just made up 5 more sets but it may be a day or two before I get a chance to powder coat them