The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)
-   -   Multi function switch (https://67-72chevytrucks.com/vboard/showthread.php?t=788634)

KQQL IT 06-15-2019 03:33 PM

Multi function switch
 
I have a 99 OBS Crew cab needs a new switch, watched a few videos read a bunch.
Do you need to pull the steering wheel for a no air bag column?

KQQL IT 06-15-2019 05:54 PM

Re: Multi function switch
 
Nope dont need to pull the wheel off or the upper plastic column cover. #25 torx bit and a 1/4" end wrench.
And a 4mm socket will work on the invert torx head on the lower cover.
Brittle parts though go slow

shifty 06-17-2019 08:24 AM

Re: Multi function switch
 
I am needing to replace mine also, '98, airbag.

Found a YouTube video that showed how to replace it without disabling SRS or taking off the wheel, just remove the two halves of the clamshell.

For the life of me, I cannot find the video anymore and it's pissing me off. I've had the replacement part for weeks now.

All the videos from 1aa auto (or whatever) on YouTube all show removing the wheel and disabling SRS.

KQQL IT 06-17-2019 09:27 AM

Re: Multi function switch
 
Not sure what differences between the two columns. But I didn't even pull the key tumbler. Left the top half of the clam in place.
Now my wipers work correctly too.

SCOTI 06-20-2019 11:06 AM

Re: Multi function switch
 
Good info so Thanks for sharing!
Where are you guys sourcing the replacement Multi Function Switch?

shifty 06-20-2019 02:38 PM

Re: Multi function switch
 
Quote:

Originally Posted by SCOTI (Post 8545562)
Where are you guys sourcing the replacement Multi Function Switch?

Sorry, long answer to a short question.

I had a bunch of credit on eBay/PayPal before they split. My Hazard switch has been stiff as hell for a while, I think a PO spilled something in it. I know there's a replacement kit for just the hazard bit, but the white text is wearing off my stalk, so I figured I'd replace the whole thing, clean it up, re-sell for $20-30 or something.

"Standard" brand has a pretty good reputation on their parts, very similar (or maybe the source) to Dorman, so I picked up theirs, p/n: DS698T

https://www.ebay.com/itm/400669584334

I got mine from eBay, but during a price drop from that seller. I think I got out the door for around $50, which was $5 cheaper than the one currently eligible for Amazon Prime, and about $30 cheaper than my big-box store with a 10% coupon.

There's a

KQQL IT 06-20-2019 05:58 PM

Re: Multi function switch
 
GM one from Amazon $200 ish

Check this out at Amazon.com
ACDelco D826A GM Original Equipment Turn Signal, Headlight Dimmer, Windshield Wiper and Washer Switch with Lever https://www.amazon.com/dp/B000C9MN90..._hiadDbJ7T0MVK

shifty 06-21-2019 09:29 AM

Re: Multi function switch
 
Quote:

Originally Posted by KQQL IT (Post 8545807)
GM one from Amazon $200 ish

Check this out at Amazon.com
ACDelco D826A GM Original Equipment Turn Signal, Headlight Dimmer, Windshield Wiper and Washer Switch with Lever https://www.amazon.com/dp/B000C9MN90..._hiadDbJ7T0MVK

4x price was is a huge difference for me. Only reason I didn't pay that high premium cost is Standard Motor Products manufactures at least some of Delco's stuff (Fuel Spider being one speedy talks about) so I was comfortable dropping $50 on a company that's trusted enough for Delco to re-brand parts on.

KQQL IT 06-21-2019 10:19 AM

Re: Multi function switch
 
$200 is a cheap price to pay too not do it a 2nd time.


All times are GMT -4. The time now is 12:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com