The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   NC Parting a complete 1971 Blazer 4x4 (https://67-72chevytrucks.com/vboard/showthread.php?t=500099)

jeffg1010 12-26-2011 06:07 PM

Parting a complete 1971 Blazer 4x4
 
AVAILABLE PARTS LIST -UPDATED: 02/11/12-
There is a lot of photos spread throughout this thread, I added more photos below, but I have over 200 photos in a photobucket album at this link: http://s213.photobucket.com/albums/c...arts%20Blazer/

There is A LOT of good parts on this Blazer and I have tried to document all of them. (including a lot of good patch pieces ranging from floor pans, to rear floor and even a few body pieces. Not to mention a complete windshield/firewall/windshield/dash and partial floor pan that is in good shape with only minor rust. The truck is now torn down to bare frame and everything is ready to buy. Let me know what you are looking for

Complete K5 Blazer, quarters and rockers are shot. Floor pans are decent except around the doors, Good frame from what I have seen. Original 307 engine with 3 speed on the column, 56,000 original miles from what I have been told. Runs and 4wd works, so transfer case should be good. Nice uncut dash, Windshield has a little fog around the edges but windshield frame is in good shape. But there is a lot of good parts and patches on this truck. let me know quick what you need. Good double wall top, minus the hatch.

The truck is located in WV, but I will bring any part you want back to NC if you are interested and live in the Charlotte area. I can also keep parts stored until Auto Fair or Good Guys in the Spring if you pay now.

Liftgate, sunvisors and rear seat are already spoken for.

Update: Rough price list is below, I have no clue how to price this stuff, so feel free to give me feedback. Many of the prices were taken from other threads, so I know I am close.

ALSO... now parting out the chassis!

1. Under Dash Speaker: $40.00 - SOLD
2. Painted Bumpers: $100.00 for both or $50.00 each - SOLD
3. Complete Doors w/ wing glass: $100 for the pair w/out inner door panels, $130 with panels-SOLD
5. Crossmembers-
6. 6 lug rally wheels: $75.00/set
7. Hubs: -
8. Upper radiator tube with end hoses: $20.00 - SOLD
9. Front and Rear Carpet hold downs: $20.00/ pair-SOLD
10. Inside Door panels: $40.00 / pair-SOLD
11. E-Brake Cables:
12. Front Seat Belts: $40.00 / pair-SOLD

12. Front Seats -SOLD
13. Front Seat Brackets/Tracks: $85.00 -SOLD
14. Proportioning Valve “L” Bracket $15.00 - SOLD
15. Transfer Case shifter $40.00-SOLD
16. Blazer Emblems: $20.00 pair-SOLD
17. Windshield Frame: $100.00-SOLD

19. Rolling chassis: $150.00

21. Front Clip Complete: $300.00-SOLD
22. 3 speed tranny: $100.00
23. Transfer Case: $100.00 -SOLD-Pending Payment

29. Taillights: $20.00 pair

32. Rear seat bolt down plates: $30.00
33. Fuel filler neck: 45.00
34. Front drive shaft: $40.00
35. Rear drive shaft: $40.00
36. Firewall: $150.00
37. Double Wall Top- minus hatch $200.00

39. Complete 307 SBC: Runs $250.00
40. Factory AM Radio: $30.00- SOLD
41. Non A/C Dash with un-cut radio hole $90.00
42. Complete Instrument Cluster: $40.00-SOLD
43. Ashtray $20.00
44. Glove Compartment Door: $40.00-SOLD-pending payment
45. Backup lights: $10.00
46. Rear Bumper brackets: $25.00-SOLD
47. Front Bumper brackets: $25.00-SOLD
48. Radiator: $40.00-SOLD
49. Radiator Shroud: $30.00-SOLD PENDING PAYMENT

51. Marker lights: $15.00 for all four

53. Heater box with hoses: $40.00
54. Non-tilt 3 speed column: $50.00
55. Rear view mirror: $10.00
56. Rear top hold down brackets: $25.00-SOLD
57. Clutch pedal assembly: $20.00
58. Brake pedal assembly : $25.00
59. Gas pedal assembly: $15.00
60. Transmission "High" Hump: $40.00-SOLD
60. Gas tank - SOLD-pending payment

http://i213.photobucket.com/albums/c...r/IMG_6829.jpg
http://i213.photobucket.com/albums/c...r/IMG_6821.jpg
http://i213.photobucket.com/albums/c...r/IMG_6834.jpg
http://i213.photobucket.com/albums/c...r/IMG_6831.jpg
http://i213.photobucket.com/albums/c...r/IMG_6810.jpg
http://i213.photobucket.com/albums/c...r/IMG_6804.jpg
http://i213.photobucket.com/albums/c...r/IMG_6808.jpg
http://i213.photobucket.com/albums/c...r/IMG_6811.jpg
http://i213.photobucket.com/albums/c...r/IMG_6789.jpg
http://i213.photobucket.com/albums/c...r/IMG_6795.jpg
http://i213.photobucket.com/albums/c...r/IMG_6798.jpg
http://i213.photobucket.com/albums/c...r/IMG_6797.jpg
http://i213.photobucket.com/albums/c...r/IMG_6793.jpg
http://i213.photobucket.com/albums/c...r/IMG_6777.jpg
http://i213.photobucket.com/albums/c...r/IMG_6741.jpg
http://i213.photobucket.com/albums/c...r/IMG_6732.jpg
both sides available
http://i213.photobucket.com/albums/c...r/IMG_6737.jpg
http://i213.photobucket.com/albums/c...r/IMG_6712.jpg
http://i213.photobucket.com/albums/c...r/IMG_6778.jpg
http://i213.photobucket.com/albums/c...r/IMG_6775.jpg
[IMG]
[/IMG]



http://i213.photobucket.com/albums/c...0/IMG_6262.jpg

http://i213.photobucket.com/albums/c...0/IMG_6267.jpg

http://i213.photobucket.com/albums/c...0/IMG_6266.jpg

http://i213.photobucket.com/albums/c...0/IMG_6264.jpg

http://i213.photobucket.com/albums/c...0/IMG_6265.jpg

http://i213.photobucket.com/albums/c...0/IMG_6269.jpg

http://i213.photobucket.com/albums/c...0/IMG_6270.jpg

http://i213.photobucket.com/albums/c...0/IMG_6271.jpg

http://i213.photobucket.com/albums/c...0/IMG_6272.jpg

http://i213.photobucket.com/albums/c...0/IMG_6275.jpg

http://i213.photobucket.com/albums/c...0/3fcd0bd6.jpg

47thriftmaster 12-26-2011 06:33 PM

Re: Parting a complete 1971 Blazer 4x4
 
Jeff,
How much for the bumpers? What are the wheels like, as far as rust and what size are they? Also what shape are the hubs in? I'm about an hour east of Mooresville so would be able to pick things up if I get them, would give me a chance to check out that Burb. Thanks

47thriftmaster 12-26-2011 06:35 PM

Re: Parting a complete 1971 Blazer 4x4
 
May also be interested in the doors, pending pics of the ruff areas and price. I'll take all I mentioned pending pricing and pics

teeitup 12-26-2011 08:15 PM

Re: Parting a complete 1971 Blazer 4x4
 
Price of speaker under dash and upper radiator tube and both the little hoses on its end
Thanks Randy

rockc 12-26-2011 08:42 PM

Re: Parting a complete 1971 Blazer 4x4
 
I would be interested in front and rear carpet hold downs.

CORSAIR 12-26-2011 08:47 PM

Re: Parting a complete 1971 Blazer 4x4
 
Interested in door panels? let me know shiped to 89060 nevada

Thanks,
Fred

WETOWM 12-26-2011 08:50 PM

Re: Parting a complete 1971 Blazer 4x4
 
Put me 2nd in line for the upper radiator hoses & tube

gmclonghorn 12-27-2011 05:29 AM

Re: Parting a complete 1971 Blazer 4x4
 
Put me down 2nd for the carpet strips. Thanks
Posted via Mobile Device

rsavage 12-27-2011 08:20 AM

Re: Parting a complete 1971 Blazer 4x4
 
I'll be 2nd in line for the underdash radio speaker/brackets if it is an original one. Thanks, Rick.

72GMCK-2500 12-27-2011 08:24 AM

Re: Parting a complete 1971 Blazer 4x4
 
Does the E-Brake still work? How are the cables? Im interested!

blazin71K5 12-27-2011 09:18 AM

Re: Parting a complete 1971 Blazer 4x4
 
If the front seat belts are in useable shape how much, also would you sell the seat brackets and how much also interested in the sun visor brackets, shipping would be to 75402.
Thanks

LUCKTRUCK 12-27-2011 02:13 PM

Re: Parting a complete 1971 Blazer 4x4
 
How much for the bracket that holds the prop.valve to the booster? It's kind of an "L" shaped looking bracket.

too much stuff 12-27-2011 05:05 PM

Re: Parting a complete 1971 Blazer 4x4
 
T case knob and blazer emblems?

Gary 70 Jimmy 12-27-2011 05:12 PM

Re: Parting a complete 1971 Blazer 4x4
 
put me in line for the speaker under the dash

68panelman 12-27-2011 06:15 PM

Re: Parting a complete 1971 Blazer 4x4
 
Can you sell me the 2 door screws with plastic angled grommet located under the vent windows? Thanks ,mike

68lowburb 12-27-2011 09:43 PM

Re: Parting a complete 1971 Blazer 4x4
 
inline for rear bumper and doors pending pics and price thanks jimmy

jeffg1010 12-27-2011 10:48 PM

Re: Parting a complete 1971 Blazer 4x4
 
I've posted some pricing. I will not be able to start tearing into this thing until next week, so hopefully you are not in a rush.

jeffg1010 12-27-2011 11:07 PM

Re: Parting a complete 1971 Blazer 4x4
 
Quote:

Originally Posted by 47thriftmaster (Post 5084360)
Jeff,
How much for the bumpers? What are the wheels like, as far as rust and what size are they? Also what shape are the hubs in? I'm about an hour east of Mooresville so would be able to pick things up if I get them, would give me a chance to check out that Burb. Thanks

I was thinking $100.00 for both of the bumpers and $200 for both doors complete without the interior door panels. As far as the hubs and rims, I saw a few ads for the wheels showing about $100 for the set, but I would like to try to sell the rolling chassis complete... so I will let you know about them.

Quote:

Originally Posted by teeitup (Post 5084535)
Price of speaker under dash and upper radiator tube and both the little hoses on its end
Thanks Randy

How about $45 shipped. I will have to get you a better pic and confirm it's condition.

Quote:

Originally Posted by rockc (Post 5084581)
I would be interested in front and rear carpet hold downs.

I will have to make sure they are there

Quote:

Originally Posted by CORSAIR (Post 5084592)
Interested in door panels? let me know shiped to 89060 nevada

Thanks,
Fred

How about $50 shipped?

Quote:

Originally Posted by 72GMCK-2500 (Post 5085267)
Does the E-Brake still work? How are the cables? Im interested!

I will check, but I would like to sell the rolling chassis complete, I will let you know.

Quote:

Originally Posted by blazin71K5 (Post 5085287)
If the front seat belts are in useable shape how much, also would you sell the seat brackets and how much also interested in the sun visor brackets, shipping would be to 75402.
Thanks

I will get you pics of these and we will determine pricing from there.


Quote:

Originally Posted by LUCKTRUCK (Post 5085617)
How much for the bracket that holds the prop.valve to the booster? It's kind of an "L" shaped looking bracket.

How about $20 shipped?

Quote:

Originally Posted by too much stuff (Post 5085866)
T case knob and blazer emblems?

How about $40 shipped?

Quote:

Originally Posted by 68panelman (Post 5085970)
Can you sell me the 2 door screws with plastic angled grommet located under the vent windows? Thanks ,mike

I will see if they are there and get you a pic

47thriftmaster 12-27-2011 11:35 PM

Re: Parting a complete 1971 Blazer 4x4
 
I will take the bumpers, just let me know when your ready. No problem on the other stuff, just let me know. For the doors I will wait on the pictures. Would also be interested in the core support, pending pictures. If you plan to do the tear down here in NC, let me know maybe I could come help you.

Quote:

Originally Posted by jeffg1010 (Post 5086551)
I was thinking $100.00 for both of the bumpers and $200 for both doors complete without the interior door panels. As far as the hubs and rims, I saw a few ads for the wheels showing about $100 for the set, but I would like to try to sell the rolling chassis complete... so I will let you know about them.


teeitup 12-27-2011 11:36 PM

Re: Parting a complete 1971 Blazer 4x4
 
Jeff, I'll take the upper radiator tube with both hoses for sure. I'll wait for pics of speaker and bracket. Thanks Randy

LUCKTRUCK 12-28-2011 12:28 AM

Re: Parting a complete 1971 Blazer 4x4
 
$20. sounds good for the prop. valve bracket.

I'll take it. Please send me your payment info.

botmfedr1 12-28-2011 12:30 AM

Re: Parting a complete 1971 Blazer 4x4
 
Put me first in line for Radiator shroud pending : its original for 307, and no cracks, breaks, or repairs.

shipping to 79908. please send me pics via text if possible (253-495-0880)

thanks,
Mondo

too much stuff 12-28-2011 01:51 AM

Re: Parting a complete 1971 Blazer 4x4
 
That sounds fine on the t case knob and emblems. Let me know when they are off and overall condition. Thanks, Eric

72blazr 12-28-2011 02:24 AM

Re: Parting a complete 1971 Blazer 4x4
 
Interested in the bolt down plates #32 pending pic. Are those prices shipped??

c1069 12-28-2011 03:15 AM

Re: Parting a complete 1971 Blazer 4x4
 
its a 4 core radiator? Or?


All times are GMT -4. The time now is 06:52 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com