New guy with a couple old trucks
 

Hello everyone, I'm David and I live in Washington.

I picked up this big ol project a few months ago

http://lstwo.com/images/91973315542190261207.jpg

It's a 70 but I like the 67 front end. It's got some rust and needs a part or two but I've always wanted one of these trucks so picked it up as a project. I have about $900 in it so far.

Then today I bought this bad boy,

http://lstwo.com/images/22397443166156922945.jpg

A 67 that runs and drives. It had sat for 5 years but fresh fuel and it runs. It's got a 307 and 4 speed trans, not original. The bed may not be original either :) . I got this one for $500.

It needs some more work but it's awfully rust free. Once I get the carb rebuilt and the brake lights working I'll load it down with tools and drive it for work as a carpenter.

Just wanted to say hi

Re: New guy with a couple old trucks
 

Cool trucks, welcome to the board!

-Richard

Re: New guy with a couple old trucks
 

Welcome, I really dig the utility truck:metal: That is going to be a sweet rig to work out of.

Re: New guy with a couple old trucks
 

Welcome to the board! Cool trucks. What part of Washington? I live in Port Orchard.

Re: New guy with a couple old trucks
 

I'm in the spokane valley.

I'll get some more pictures if I have time today, I've got some work to do on it.

Re: New guy with a couple old trucks
 

Welcome to the boards.
Nice work box truck. Enjoy them.

Bill

Re: New guy with a couple old trucks
 

http://lstwo.com/images/74740648892273024084.jpg

http://lstwo.com/images/13060059496955781017.jpg

http://lstwo.com/images/91595615016623083855.jpg

The previous owner has the front trim and all new door handles for the work box he will hopefully find soon

Re: New guy with a couple old trucks
 

Took the seat out and took the old cover off. The foam was in rough shape but I think between two seat bottom foams from astro benches I can get a nice cushion. That will have to do until I can get a newer seat to put in.