window rust
 

So I have a qyeztion to ask. I have some rust on tve lower windo drip molding/ cowl area. I k know that the don't have panels for the area... any advice on what to do... I xan post pics later or look on my build thread... I was going to try and fab one up I have a buddy who is one of the best metal men in denver... but wanting some gelp
Posted via Mobile Device

Re: window rust
 

Having trouble visualizing the area...any pics?

Re: window rust
 

I only have internet on my phone rigjt now is there a way to upload pics from a phone
Posted via Mobile Device

Re: window rust
 

http://i796.photobucket.com/albums/y...229_114713.jpg
http://i796.photobucket.com/albums/y...229_114651.jpg
Posted via Mobile Device

Re: window rust
 

Any one have a suggestions
Posted via Mobile Device

Re: window rust
 

Remove the inner cowl (the piece that your wipers bolt into) and repair with metal. I don't have any pics of that exact area, but this is one of mine looking from inside the cab, with dash removed.
http://farm6.staticflickr.com/5145/5...a687045d8e.jpg
After repair:
http://farm8.staticflickr.com/7151/6...f680022baa.jpg

Re: window rust
 

Did you gave to cut tge cowl off or us it rivited on like a lot of the other parts on the
trucks
Posted via Mobile Device

Re: window rust
 

It's spot welded, either use a 5/16" drill or a spot weld cutter. Here is a pic of the new inner cowl welded on, you can see where it's spot welded on (actually more like a plug weld since I don't have a spot welder).
http://farm8.staticflickr.com/7034/6...35509955be.jpg