The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- 67-72 (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=220)

- - 1968 Body Side Molding Question (https://67-72chevytrucks.com/vboard/showthread.php?t=675259)

Karl's Kustoms

06-30-2015 07:14 AM

1968 Body Side Molding Question

Could anyone post some scans from the assembly manual showing the measurements for the placement of the body side trim for 1967 - 1968 fleetside (or wide bed) pickups? I am doing some body work and am going to install mar-k trim at a later time. Unfortunately the factory chrome was held on by a lot of EXTRA sheet metal screws, so I am trying to see which holes to fill and which ones to keep.

Thanks

Karl's Kustoms

07-01-2015 07:50 AM

Re: 1968 Body Side Molding Question

Ttt

tcoop68

07-13-2017 12:22 AM

Re: 1968 Body Side Molding Question

You can purchase a builders spec book that has all the measurements in it I just finished a 67 was great help it was Mar K trim too very good qualities

All times are GMT -4. The time now is 01:35 AM.