Replacing front bumper?
3 Attachment(s)
Ok guys I've seen numerous trucks with the front bumper pushed about 5inches back and slant downward about 3inches after a collision. What parts are needed to fix this?
|
Re: Replacing front bumper?
i would say new bummber and supports
|
Re: Replacing front bumper?
You will need the bumper bar, both inner brackets, both outer braces (from outer brackets to radiator support mount brackets), and possibly both outer brackets. The plastic bumper fillers and headlamp mount panels may need to be replaced as well. Usually when the bumper goes back like that, it will miss the radiator support (or just nick the bottom).
Accessing it is not too bad- pull out the grille, and there are two bolts that go through the inner brackets and hold it to the frame. That should pull the bumper off. |
Re: Replacing front bumper?
Thanks guys I will post progress pics. I got a new middle bumper painting it black. (The chrome is dented from the collision.)
|
All times are GMT -4. The time now is 07:06 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com