Jans 53
Hello everyone
I would like to introduce my project to your fine forum.Its a 53 3100 on a S10 chassis with a GM performance zz4 350, 8.8 posi with 373 gears, TH350 trans with gear vendors overdrive unit and a 22 gal mustang tank.I will post some pics as soon as i can. |
Re: Jans 53
:hi2:
You had posted this in the wrong section (Pre-47) so I moved it for ya. :welcoem: to the forum! |
Re: Jans 53
:hi2: and welcome to the forum, lots of great people to help you if needed and learn from you if needed. Sounds like a great build, ready for the pics:devil: we always like pics...Jim
|
Re: Jans 53
Anyone have any advice on how to download pics?
|
Re: Jans 53
|
Re: Jans 53
though most of us use photobucket :D
and welcome to this awesome site |
Re: Jans 53
Quote:
|
Re: Jans 53
Thanks for the help!http://67-72chevytrucks.com/vboard/a...ictureid=20587
|
Re: Jans 53
Welcome, this site can always use another truck project....
Marc |
Re: Jans 53
2 Attachment(s)
So this is what I started with in 2006. Up until this year my time to work on it has been limited. In the meantime I was purchasing the parts I would need.
|
Re: Jans 53
1 Attachment(s)
The mock up. I opted to shorten the front of the bed by 4 inches so of course i had to shorten the frame.
|
Re: Jans 53
3 Attachment(s)
Did a mini tub on the bed.
|
Re: Jans 53
2 Attachment(s)
CPP brake booster
|
Re: Jans 53
1 Attachment(s)
Found this new ididit column on craigslist with the 65 impala wheel for $100.00 !!!!! Score !!!
|
Re: Jans 53
3 Attachment(s)
GM Performance ZZ4, TH350, Gear Vendors overdrive.
|
Re: Jans 53
3 Attachment(s)
Cleaned and painted frame.
|
Re: Jans 53
4 Attachment(s)
Chassis assembled thats 8.8 rear end with 3.73 posi that gives me 4 wheel disc and check out the control arms you get those if you find a eddie bauer exploder. Tank is a 69 22 gal mustang with a aeroquip fuel pump kit.
|
Re: Jans 53
Great looking project!
|
Re: Jans 53
Looks really nice, you are doing some great work...Jim
|
Re: Jans 53
Looking great.
|
Re: Jans 53
Quote:
If you're over in Garage Journal you'll know I mean this in the nicest possible way - YOU SUCK!!! Man, $100 for an ididit column? Craap, I thought I did good getting one for $350. I like your project, did you paint the frame with catalyzed automotive paint, rattle cans or maybe brush on enamel like Rustoleum? It looks like a very nice job and I'm always surprised how good the various methods look. Also, what are your mini tubs from? They're very nice. |
Re: Jans 53
|
Re: Jans 53
Thanks everyone, this project has been a lot of fun for me. I enjoy looking at all your projects, some beautiful trucks being built.;)
Dan, $350. is a heck of a good price! I couldnt get there with my money fast enough then when I got there he threw in the steering wheel. SWEET!!! The paint is summits catalyzed chassis paint in satin, as you know we cant get it shipped to cali, fortunately, Im only a couple hr's from the sparks NV werehouse. The tubs are from Tractor Supply cost $30. each and look to be about a 16g. (You will find them in the trailer section) |
Re: Jans 53
3 Attachment(s)
So here's more part's that I have accumulated. American Autowire ,NVU Gauges and aeromotive fuel system.
A note on the NVU gauges -Since I was using the mustang sender they calibrated the gauge so that it would read correctly...no charge.:metal: I need to have a driveline made, anyone have any recommendations? Empire? Denny's? |
Re: Jans 53
Quote:
|
All times are GMT -4. The time now is 07:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com