Alright.......how do you get the ign. switch and bezel off? paper clip in hole etc...
 

I can not for the life of me, remember how to get this thing out..I have been fooling with it for hours now!!! LOL

Did ya get it yet ..if memory serves me ..put paperclip in hole,turn key to ACC. and then pull..good luck

------------------
LIKE 'EM BIG AND TOPLESS !! <A HREF="http://communities.msn.com/OurMudToys
I" TARGET=_blank>http://communities.msn.com/OurMudToys
</A>
Check out my '70K5Blazer 350/205 (project 35"BOGGERS)4"suspension/3"body installed,starting bodywork&paint
86K5BLAZER 454ci.350/205 case 4" susp.,3"body 3/4ton4.10s 38"Swamper sx
83CJ-7 304ci.edelbrock 600 and performer intake ,headers 31"Swamper sx
'86 GMC plowtruck (BOSS V-PLOW)
"Welcome to where time stands still
No one leaves and no one will
Moon is full,never seems to change
Just labeled MENTALLY DERANGED..."


"THE INTIMIDATOR" gone but never forgotten !!!

You might have to turn it a litte past ACC. Key must be in. IF yours is as old as mine, you won't even need the paper clip. That really scares the paint guy when he turns the key too far! Ha http://67-72chevytrucks.com/board/ubbhtml/smile.gif Jeff.

------------------
1971 Cheyenne C-10 w/700R4 and Tuned Port Injection
1969 K5 Blazer New project
1995 K1500 Sub(Mommas car)
1989 VW Golf(Beater)
Will be the daughters car if she will pay her insurance! Ha!

Yes, wrathchild is correct. However, get a heavy duty paper clip (the large ones) as the small ones are too thin and bend too easy. I also sprayed penetrating oil in the cylinder so I came out easier. Good luck, I just did it last month. Kurt

make sure u use the correct words when doing this!

------------------
67 stepside 4x4 Owensville MO mudder67@hotmail.com

I have used all kinds of words so far!!!!!!!!!........lol......It is not working for me............... http://67-72chevytrucks.com/board/ubbhtml/smile.gif

Try using a small allen wrenhc in the hole. It is much stronger, and will not make your finger bleed when you get p*ssed and press real hard.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
E-mail longhornmail@yahoo.com
My name is Andy...not Randy...I'm in Ohio...Not Illinois...close enough?
Columbus Ohio

what about the bezel?

Tap the ring with a screwdriver counter clockwise until it breaks lose then hold the wiring behind the dash and finish turning the front bezel pcs. off

------------------
Jay Snyder
Leechburg, PA (Northeast of Pittsburgh)
'71 Chevy Dually 4x4
'69 Chevy Pro Street SWB
'58 Chevy Apache 4x4
'72 chevy camper special 4x4 402 v8 (not factory) just cool.
67 GMC shortbed v6 4spd.

we buy and sale trucks and parts

got it guys........thanks http://67-72chevytrucks.com/board/ubbhtml/smile.gif