'67 C20 2wd Cummins/Allison swap info needed
 

I've scrolled through page after page of 4x4 Cummins swaps, but can't find any substantial info on 2wd drive swaps. I've got a 67 C20 that I'm turning into a dually using the front crossmember and rear susp/axle from an 81 C30 donor. I bought a '97 delivery van that has a Cummins/Allison combo that I'm going to swap in.
This is my first Cummins swap. Want to do it right.
Are there any 2wd build threads on this board? I welcome any and all suggestions as far as swap suppliers and related info. Thanks

Re: '67 C20 2wd Cummins/Allison swap info needed
 

There are few 67-72 Chevy swaps on here. Most are 4wd, but same principals apply to 2wd . Square body 73+ swaps will be very similar. Check the "show your motor mounts" page as I expect this is where you have the most questions. There are some Allison swaps (programming questions) here also.