Re: Impala SS Rear Disc Brake Brackets
 

All of my products are always available. The quantities are not limited to a one time run. I replied to your PM.

Re: Impala SS Rear Disc Brake Brackets
 

Has anyone found a backing plate to use or are you running without a backing plate??

Re: Impala SS Rear Disc Brake Brackets
 

I assume you are talking about a dust/gravel shield? If so, I do not know of any stock application that will work.

Re: Impala SS Rear Disc Brake Brackets
 

Can you send me a paypal invoice for a set... Robcubs@aol.com

Thanks

Re: Impala SS Rear Disc Brake Brackets
 

PayPal invoice sent.

I am supposed to have the laser cut parts for these on the 29th.

Re: Impala SS Rear Disc Brake Brackets
 

Captainfab, I'm looking to switch to rear disk brake here very soon. I have a 72 and the back spacing on my wheels is perfect. I don't have room to be any wider. Would running the impala rear setup add any width to my rear end?

Re: Impala SS Rear Disc Brake Brackets
 

Any of my 5 rear disc brake conversions are going to move your wheels and tires out about 1/4 inch. There is just no way around it. The rotor hats are thicker than a brake drum.

Re: Impala SS Rear Disc Brake Brackets
 

I need a set for 1972 12 bolt.

Re: Impala SS Rear Disc Brake Brackets
 

I will send you a PM with ordering info.

Re: Impala SS Rear Disc Brake Brackets
 

I sent order through PayPal. Thanks

Re: Impala SS Rear Disc Brake Brackets
 

Will I need to install longer wheel studs since the rotor hat is 1/4 thicker? My lug nuts only have about 7 threads as it is now.

Re: Impala SS Rear Disc Brake Brackets
 

Longer wheel studs would be a good idea. However I do not know of a OEM application for longer studs. You will have to look at aftermarket studs.

Re: Impala SS Rear Disc Brake Brackets
 

Got my brackets! Is this the correct way to mount them?

Re: Impala SS Rear Disc Brake Brackets
 

Yes that is correct.

Re: Impala SS Rear Disc Brake Brackets
 

Thanks for the brackets! Worked great. I used longer wheel studs because I didn't have enough thread with the stock. I used Dorman 610-358 they fit a 97 ford aerostar. I had to drill the rotor wheel stud holes out to a 17/32.

Re: Impala SS Rear Disc Brake Brackets
 

Thanks for the pic and the info on the wheel studs. Are those SAE or Metric? I didn't think about looking at Fords for wheel studs.

Re: Impala SS Rear Disc Brake Brackets
 

They are SAE 1/2 inch by 20 threads same as factory. My original wheel studs had a knrul diameter of .615 these are .612 but they were a press fit.

Re: Impala SS Rear Disc Brake Brackets
 

Will you email a paypal invoice for a bracket kit and the adapters to wayne8176@gmail.com please. My zip is 59901

Re: Impala SS Rear Disc Brake Brackets
 

Invoice sent and payment received. Thanks :)

Re: Impala SS Rear Disc Brake Brackets
 

I am officially notifying everyone that I will be on vacation from 02-05-18 thru 02-13-18. I will do my best to get all orders built and shipped before I leave, if placed by 01-31-18. Orders placed while I am gone will be built and shipped in order of receipt of payment once I return. Thanks for understanding.

Want to buy a set, PayPal @emm112289@yahoo.com
Thanks! Enjoy the vacation 🤘🏻
Posted via Mobile Device

Re: Impala SS Rear Disc Brake Brackets
 

I replied to your PM and sent you a PayPal invoice.

Re: Impala SS Rear Disc Brake Brackets
 

PayPal sent.

Re: Impala SS Rear Disc Brake Brackets
 

Under what name was the payment made? I have not received any payments today for any Impala SS rear disc brackets.

Re: Impala SS Rear Disc Brake Brackets
 

Chris Tyler. paid on April 3