The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Engine & Drivetrain (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=24)

- - Pushrods (https://67-72chevytrucks.com/vboard/showthread.php?t=759133)

Big Blue

03-12-2018 02:49 PM

Pushrods

I have be looking for a set of push rods. I am a little confused on which ones to get. So I am looking for help from the group here. It is a 350 stock engine. Any help would be great. John

YoungPup1977

03-12-2018 06:04 PM

Re: Pushrods

Do you have guide plates ?

B. W.

03-12-2018 07:39 PM

Re: Pushrods

If your engine is a stock 79 flat tappet 350 you can use a stock pushrod. 5/16 diameter, 7.794 length.

https://www.speedwaymotors.com/Speed...Inch,3214.html

Big Blue

03-12-2018 11:48 PM

Re: Pushrods

Thanks YoungPup1977 , No it does not. Thanks Again.

Thanks B. W., That is good news, I should have checked this site before I ordered and paid for a set from Advance Auto. It would have been a lot cheaper going with Speedway. Speedway $19.99 , Advance $34.99. Thanks Again, John

GASoline71

03-13-2018 03:43 PM

Re: Pushrods

Stock pushrods for a 350 can be bought over the counter at any auto parts store.

Gary

All times are GMT -4. The time now is 12:17 AM.