Parts suppliers in Alberta?
 

Hey all. I know there are a couple of Albertans kicking around here and it looks like the season is finally here (in Calgary).
I'm sure that GMCpaul and Classic Heartbeat are good parts suppliers but is there anyone on this side of the border? I haven't been having a whole lot of luck with customs recently.

Thanks in advance,

Greg

http://www.scottssupertrucks.com

Hey, I was just wondering, is your user name supposed to be Canada, cuz if it is I think you spelt it wrong :P

------------------
1969 Chevrolet Custom Camper 20 350/400 70k original miles, 99% rust free

They have the Internet on Computers now? --Homer Simpson


Gee_Emm's Page

Vote for my truck to be on the label of a bottle of Jones Soda!!! http://67-72chevytrucks.com/board/ubbhtml/smile.gif


[This message has been edited by Gee_Emm (edited April 20, 2002).]

[This message has been edited by Gee_Emm (edited April 20, 2002).]

I m from P E I and I get most of my parts from Bills truck shop in Ontario.He is a good guy to deal with and he knows his stuff. He has new and good used parts.I got a used original 67 front fender but i paid $200. He gets most of his parts from california.

------------------
67 c20 lwb stepside,327
93 silverado 4x4
92 buick regal
94 ski doo formula stx
91 sea doo xp
86 honda 350 4x4
89 johnson outboard 25 hp

The one who dies with the most toys wins!!!

I deal with finishing point in Edmonton. He gets his sheet metal from cross canada in edmonton. The only place I know that is strictly chev is scotts in reddeer

------------------
Dean
edmonton,canada
68 c10, project in works,350, th350, plain jane.
SLOW AND STEADY GETS THE PANELS READY
http://communities.msn.ca/MyChevytruckpage

Thanks for the names, guys. I'll look into that.

Gee Emm - yeah I noticed I'd spelled it wrong JUST as I was hitting the enter key when I was signing up. I sent the webmaster a message asking if he could change it but as you can see......

not like i have to type it wrong every time i try and log in or anything ;->

Greg

Scott deosn't seem to be really into these trucks...i think he is in the business for the money (which is not cool).
I haven't found any other dealers close by but i heard that there is a good one in Edmonton so i will probably look into that when i need more parts.
You can give Scott a try but my first impression of his parts wasn't that great.

D!m

------------------
BlueStreak 69 Chevy C10 -
(Under Construction)
pos_8@hotmail.com

I have yet to buy anything from scotts but when I emailed him with a question he was very prompt in responding, and he wasnt sure if he had responded so he emailed me again just to make sure.

Super Service truck parts in St Albert seems pretty good to me so far. Cheaper than scott's and better to deal with and all he deals is 67-72 GM trucks.

------------------
69 CST 10, 402, steel crank, heavy rods, Federal Mogul Forged Pistons, 9.9:1 compression, polished ported 781 heads 2.19/1.88 manley stainless valves, Crane Powermax Hydraulic roller 288/296 and .587,.610 lift, hardened pushrods, Crane Roller Rockers, Weiand Action Plus, 750CFM Rochester QJET, MSD HEI, MSD 8MM Wires, Dynomax Ceramic coated headers, should be about 500 H.P. 700R4 2500 stall, pretty nasty shift kit, 373 Auburn Pro Series Posi, buckets/console air/tilt/tach 4wheel discs

Daily Driver: 92 Chev Reg Cab LWB Silverado 4x4, loaded, 350 Accel filter/cap/rotor/coil/AC Delco wires/AC Delco RapidFire plugs, Edelbrock intake and headers, 180 degree thermostat, Hypertech Thermomaster Chip, true duals 700R4 with B@M Shift Kit for now!




[This message has been edited by Chevyman69 (edited April 21, 2002).]

Yeah i want ot go to the guy in st albert. just havent had the time. Lots of ads in the edmonton and area bargain finder for parts for 67-72's. a 3.73 posi for 300.

------------------
Dean
edmonton,canada
68 c10, project in works,350, th350, plain jane.
SLOW AND STEADY GETS THE PANELS READY
http://communities.msn.ca/MyChevytruckpage

There seem to be more sources for resto stuff for most cars/trucks closer to Edmonton and the classics seems to be a little cheaper too

Greg

I buy most of my stuff from superservice in St.Albert he's got good prices and he's a good guy.