Need a door window channel for my 48.
 

I just found that I am missing the rear window channel on the drivers door. The one that screws in over the top of the latch. They are different side to side. If you look at the bottom of the channel in my photo you can see it leans to the right, that is for the right door, I need the one that leans to the left.

Brian

Re: Need a door window channel for my 48.
 

Chevs of the 40's has them.
Item #3685369 47^50

Re: Need a door window channel for my 48.
 

ahhhhhhhh thanks! I still would like an original one but that will do it too.

https://www.chevsofthe40s.com/detail...ront_Wide.html


Brian

Re: Need a door window channel for my 48.
 

My truck project is about four years old now, and some of the parts that I squirreled away when I first got the truck are proving difficult to find.

Just spent $80 for some window channel that I already have somewhere, but can't find. After a while I just break down and buy the part I need because I can't afford to spend any more time looking for it!

If you don't have any luck on the board, you might try Mothertrucker in Tucson, or Paul's pickup parts for some used ones.

Good luck,

Phil

Re: Need a door window channel for my 48.
 

Classic Parts has them too. This is a right, but I imagine they have a left tool

Part Number 03-916

Re: Need a door window channel for my 48.
 

Thanks guys, if I have to get a repro you have giving me some places, thanks.

I did just order the special screws and nuts for the lower corner of those window frames.


Brian

Re: Need a door window channel for my 48.
 

I've got a number of 47/50 doors that I accumulated and most every one is missing that piece. I think most of the innards of those doors got nabbed to turn later doors in to on piece window doors when NSRA had the 48 and earlier cut off date as far as year model for entries.

Re: Need a door window channel for my 48.
 

I have a spare if you want it, just pay for shipping.Its from a 50.

Re: Need a door window channel for my 48.
 

I PMed you, heck yeah! Is there anything you need?

Brian

Re: Need a door window channel for my 48.
 

I also have one as well from a 48. Would do the same. Pay shipping and it is yours.

Re: Need a door window channel for my 48.
 

Cool, is it as rusty as Crossfires?

Brian

Re: Need a door window channel for my 48.
 

No. I will get pics later for you

Re: Need a door window channel for my 48.
 

Cool!

Brian

Re: Need a door window channel for my 48.
 

Here is a pic.

Re: Need a door window channel for my 48.
 

One more.

Re: Need a door window channel for my 48.
 

Thank you guys so much, in looking at them it's a toss up so to pick one I googled both of where you live and Crossfire is closer so I will bother him with it. :D

Brian

Re: Need a door window channel for my 48.
 

Sounds good.

Re: Need a door window channel for my 48.
 

Your part is on the way, went out today USPS, enjoy.

Re: Need a door window channel for my 48.
 

Thanks so much, how much and your paypal name please, you can send me PM on this.

Brian