The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   S10 S15 Luv Blazer (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=130)
-   -   ZR2 Fender Flares (https://67-72chevytrucks.com/vboard/showthread.php?t=772516)

Mudder 10-02-2018 11:12 PM

ZR2 Fender Flares
 
My factory flares have a small molding (gasket) between the flare and fender. GM says they don't show them. They are coming out in a few places. I am wondering if they are attached to the flare itself and if they come together. Help!!! :)

95 S_Trucker 10-03-2018 08:19 AM

Re: ZR2 Fender Flares
 
The last flare I bought from GM had the U shaped molding in a roll in the box.

Door edge guard would work too.

https://www.amazon.com/Black-Guard-M.../dp/B0055TQ87A


Good luck with the front flares. They are kind of a pain to remove. The inner fender needs removed.

Mudder 10-04-2018 07:05 AM

Re: ZR2 Fender Flares
 
Thank you!!! Very little inf on these. GM doesn't even know anything.


All times are GMT -4. The time now is 05:28 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com