The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)
-   -   Is this the new normal for parts.....ie Vortec dist. cap (https://67-72chevytrucks.com/vboard/showthread.php?t=778948)

61_FL_Apache 03-13-2021 11:10 AM

Re: Is this the new normal for parts.....ie Vortec dist. cap
 
Check out the last post on my thread that started the issue for me. I hope you find it helpful.

http://67-72chevytrucks.com/vboard/s...d.php?t=801608

legendman 03-25-2021 11:40 AM

Re: Is this the new normal for parts.....ie Vortec dist. cap
 
Update on my woes.

It's definitely the cap and rotor, I ordered a cheap distributor off evilbay and it ran ok for about 20 miles and the stumbling and bucking came back with a vengeance.
Seemed to be worse at light throttle.
So I took the a wire wheel to the contacts on the old Standard cap and rotor I had from the old distributor and put it on the chinese distributor, stumbling is gone, actually goes down the road pretty good now.

legendman 03-28-2021 09:30 PM

Re: Is this the new normal for parts.....ie Vortec dist. cap
 
Quote:

Originally Posted by legendman (Post 8899213)
Update on my woes.

It's definitely the cap and rotor, I ordered a cheap distributor off evilbay and it ran ok for about 20 miles and the stumbling and bucking came back with a vengeance.
Seemed to be worse at light throttle.
So I took the a wire wheel to the contacts on the old Standard cap and rotor I had from the old distributor and put it on the chinese distributor, stumbling is gone, actually goes down the road pretty good now.

Update, ran great for 1 day, back to sputtering and stumbling really bad now.
Just ordered a UNITED MOTOR PRODUCTS DCR820X with brass contacts, hope that's the cure because I will list this piece of poop for sale now that I got a Dmax this morning and the beauty of a Diesel...... no spark plugs

61_FL_Apache 03-29-2021 01:24 PM

Re: Is this the new normal for parts.....ie Vortec dist. cap
 
Legendman, do you have any check engine lights? When I had this issue, it showed P1345. When I corrected that issue, not more problems with the current cap and rotor I was running.

legendman 03-29-2021 02:35 PM

Re: Is this the new normal for parts.....ie Vortec dist. cap
 
Quote:

Originally Posted by 61_FL_Apache (Post 8901023)
Legendman, do you have any check engine lights? When I had this issue, it showed P1345. When I corrected that issue, not more problems with the current cap and rotor I was running.

I did right after I put the new distro in but I got the timing right and the check engine light is out.


All times are GMT -4. The time now is 10:09 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com