Cab and door body work In order
I am reskining both my doors and they need some work on the Inside. Should all that work be competed before I do the cab so when I do the rockers they can be aligned with the doors?
|
Re: Cab and door body work In order
Also a guy I was talking with said he sandblasts cabs. Seems to me this might warp stuff. Is that a common practice?
|
Re: Cab and door body work In order
Get your doors dun first but I would check the skin fit with your opening as you go then do rockers
|
Re: Cab and door body work In order
Quote:
|
Re: Cab and door body work In order
Ok. My cab will be getting a new floor put in it so I assume it should be the very 1st step. Then do the doors and then do the rest of the bottom of the cab
|
Re: Cab and door body work In order
Do your doors first then the outer rockers. I did my rockers first and now they are off about 1/4". I have to cut them out a reset them so they fit right. Lesson learned.
|
All times are GMT -4. The time now is 01:55 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com