WTB early Corvette rocker covers,road draft tube, ram horn manifolds, aluminum intake
 

I recently picked up a rebuilt 283 for my 57 NAPCO. It currently has the stock stamped steel valve covers, a cast iron 2 barrel intake and carb. No exhaust manifolds. I am also missing the road draft tube the bolts to the block by the distributor. If anyone has a reasonably priced set of “staggered” corvette rocker covers, stock type “rams horn” exhaust manifolds and period style aluminum intake like an Edelbrock C3B/ C3BX intake with the oil filler tube provision, please advise cost and total price shipped to Leander Tx 78641.

Re: WTB early Corvette rocker covers,road draft tube, ram horn manifolds, aluminum in
 

Some parts that I have

Re: WTB early Corvette rocker covers,road draft tube, ram horn manifolds, aluminum in
 

Will look in the parts shed, thinking I have a April '57 283 4 BBL cast iron intake and a driver's side 283 '57 exhaust manifold if you would have a possible interest in either for your '57 NAPCO. Will look tomorrow and let you know for sure.

Re: WTB early Corvette rocker covers,road draft tube, ram horn manifolds, aluminum in
 

I don't know if this is the draft tube that you are looking for. It's "G" on this posting.

https://67-72chevytrucks.com/vboard/...d.php?t=847312

Re: WTB early Corvette rocker covers,road draft tube, ram horn manifolds, aluminum in
 

Not mine - found pic on interweb - but here is what you need for a stock road draft tube. Top part is under the intake and the other goes in the hole in the block using the bolt shown. I am not 100% sure if the actual hose is formed or not.