Originally Posted by harleychop (Post 7541976)

Anybody have pics to show hoe you mated the brake pedal pushrod to the power booster?

Originally Posted by Captainfab (Post 3461720)

Here is the newest version of the power brake booster adapter bracket that I've been making since 1993. This bracket is fabricated from laser cut 10ga mild steel and fits 1960-62 Chevy and 1960-63GMC Pickups, Suburbans and panels and is 100% bolt on using holes already in your firewall. The booster side of the bracket has a 3 3/8" x 3 1/2" hole pattern. Boosters with this pattern are commonly found on S10's and full size pickups, Suburbans, Blazers and Tahoes from 1988 to at least 1998. You can also find compatable boosters on early to mid 70's Impala's. Of course you will have to join the booster pushrod to your stock MC pushrod that attaches to your brake pedal. This can be done by either threading both ends and using a coupling nut, or by just welding them together once you determine the correct length.

I have had the original version ('63-'66) of this bracket on my '66 Suburban and have driven over 120,00 miles with no issues. I have also installed these on a couple of local pickups with good results as well. If you are wanting to add hydroboost to your pickup, Suburban or Panel I also offer a mounting plate for the hydroboost HERE

The price on the bare steel brackets is $55.00 plus a flat $12.35 shipping in the US. If you are located elsewhere contact me for shipping charges. You can also get this bracket in a satin black powder coat for an additional $6.50. Mounting hardware is included.

Originally Posted by reed62 (Post 7597531)

Hey Capt Fab,
I need to purchase one of these brake booster brackets for my 62 truck. Let me know how to do this...

Randy

Originally Posted by Classic v6 GMC's (Post 7744236)

PM me payment info and total for a 60-62 Brake Booster Adapter, Power Steering Adapter Plate and the tube and flange.
Thanks,
Andy

Originally Posted by MikeG. (Post 7744324)

PM sent

Originally Posted by El Paso c10 (Post 7748313)

I would like to place an order for a 1962 no clutch bracket, please let me know how I can get this process started.

Originally Posted by MASTERBrian (Post 7857562)

I'm sending you a PM for my 1960 Suburban...can't wait to get this part going!

Originally Posted by Racinaround (Post 7870909)

Im ready for a Bracket for a 61

Originally Posted by hop sing (Post 7880452)

Good evening ,, need to order a master cylinder bracket for a 64 and also a p/s bracket ,just got one question for you what's the best donor power steering gearbox to try and get ? and will donor pitman arm work thx Hop you can invoice me at kirktgee63@gmail.com on pay pal thx for your time Hop :sumo::sumo:

Originally Posted by creep (Post 3994088)

Bracket fit beautifully!

http://i9.photobucket.com/albums/a91...p/DSC05440.jpg

Originally Posted by Captainfab (Post 8239444)

He says right here in the post below that pic.

http://www.67-72chevytrucks.com/vboa...3&postcount=41

Originally Posted by Captainfab (Post 8240361)

I do not know what booster is the thinnest. You will have to find a single diaphram booster from the list of compatible boosters. You do realize that the thinner single diaphram boosters give less braking assist that a same diameter dual diaphram booster, correct?

Originally Posted by 60apache (Post 8242842)

yes, I just want the cleanest look. what is your best suggestion on the booster?

Originally Posted by Captainfab (Post 8242946)

I would go with any of the many, many compatible dual diaphram boosters or with a hydroboost as you asked about in your PM to me.