Originally Posted by Captainfab (Post 7432835)

I'll send you a PM.

Originally Posted by pyrocrew (Post 7435350)

Captainfab, I would like to buy a booster and hydraulic clutch mount kit with everything. My transmission is nv4500 with internal throw out bearing. Could you pm me. Thanks

Originally Posted by CVANN (Post 7437553)

Do you have pictures of your 66 model bracket. I'm trying to mount a booster kit on my 66 c10. Brackets are not quite right. Will yours bolt right up?

Originally Posted by randomco (Post 7439007)

Need a quote for 67-72 bracket to 92123 in powder coat! Sent you an email too.

Will the bracket work with my hydroboost plate I have already? The bracket that came with my booster sticks out too far.

Originally Posted by jocko (Post 4665935)

Captain,
Received the bracket in the mail today - beautiful piece of gear, thanks very much.

For everyone else's reference - I bought a 75 Impala Booster and a 67 C10 Drum/Drum master cylinder to use on this - all the parts fit together with no mods or hole drilling. Part arrived vacuum packed and is PC'ed beautifully. (I have not mounted it to the firewall yet - only speaking of the mc-to-booster-bracket so far, but I know it will fit the firewall also).

I'll post the install if I ever get off these #$%^&* cruthces... :) but here are the O'Reily's part numbers if you're interested (btw, same stuff/store as "Kragens"):

67 C10 Master Cyl ($18.99 + $10 core) Part # 10-1329 (Note: the part number on the website appears to be incorrect (13-1329) – when I called O’Reilly’s, they didn’t list this part number – they list the MC under 10-1329, and the receipt showed this as well – I think the website must be either a typo or an old part number. But what I bought looks exactly like what is in the link and its part # at O’Reilly’s is 10-1329)
75 Impala Booster ($104.99 + $10 core) Part # 54-81002

Thanks again Captain, appreciate the quick deliv and great craftsmanship.

Originally Posted by RRR18 (Post 7475947)

PM returned. Payment sent.

Originally Posted by Already Gone (Post 7498772)

Will your bracket work with this setup.? My truck is a 72 C10 with the original factory power brakes.

http://www.ebay.com/itm/331723920041...%3AMEBIDX%3AIT

Originally Posted by jeh (Post 7505111)

I have a question about your bracket, I have an original type booster on my truck now with the step down style bracket that attaches to the firewall. With your bracket is the rod that goes to the brake pedal at an angle?

Originally Posted by jeh (Post 7506170)

Will I have any trouble with the automatic shift linkage on the steering column as far as clearance issues with the booster? do you have any pictures of it installed on a column shift truck? Thanks

Originally Posted by Captainfab (Post 7507466)

If you use your original booster or one the same size, it will interfere with the column shift linkage. You will need to use a booster with a diameter less than about 10". No I do not have any installed pics other than what members have posted in this thread.

Originally Posted by Rustyo61 (Post 7522684)

Bracket arrived today and the fit and finish are the best I have seen. Thank

Originally Posted by Captainfab (Post 7499831)

I have no idea what the mounting stud pattern is on that booster that they are using. The '67-'70 boosters are one of the boosters that are compatible with all of my booster brackets. The '71 & '72 boosters have a different mounting stud pattern and require slight elongation of the holes in my booster brackets.

Originally Posted by Captainfab (Post 7551271)

The booster and master assembly you show in that picture, will bolt right up to your firewall since it is an original replacement assembly. No additional bracket is needed. My booster brackets are typically used with nonstock boosters to get everything closer to the firewall. Additionally, my booster brackets are not compatible with a column shifted auto trans unless the booster is smaller than about 10" in diameter. If you do want to eliminate the factory brackets and get everything closer to the firewall, the booster mounting holes will have to be elongated if that is an original style '71-'72 booster.

Originally Posted by Already Gone (Post 7551702)

Thanks for the info. My idea was to use smaller booster ( this one is 9 inches ) and get it right up to the firewall. Sounds like I should just use the above setup the way it is.

Originally Posted by jeh (Post 7552208)

I'll throw in a pic of mine after I got it all buttoned up. Looks so much better tucked in toward the firewall.

Originally Posted by Already Gone (Post 7551702)

Thanks for the info. My idea was to use smaller booster ( this one is 9 inches ) and get it right up to the firewall. Sounds like I should just use the above setup the way it is.

Originally Posted by mantolik (Post 7583234)

Hi - looking for one of these black power coated sent to 44001 -

Originally Posted by Already Gone (Post 7611740)

Can you send me ordering and pricing info on a black powdercoated brake booster bracket. I will give you a Montana address for shipping. I will need it in Montana by June 15th.