The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Vendor Reviews (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=238)
-   -   Just a rant (https://67-72chevytrucks.com/vboard/showthread.php?t=289311)

ssfirefighter 04-26-2008 05:58 PM

Just a rant
 
LMC has to have the rudest, most un-useful phone staff I have ever had to deal with.:cuss::cuss::cuss:

leddzepp 04-26-2008 06:07 PM

Re: Just a rant
 
I have never had any luck with them either, join the club!

Houston54 04-26-2008 06:07 PM

Re: Just a rant
 
I can't fault them on that myself but their shipping charge policy is terrible. They still base it on the total cost and your "area" instead of actual cost. That sends me to shop the other sources first and use LMC as a last resort.

I did get my glass from them and even with shipping charges they beat the pants off any other supplier. It came well packaged.

OrangeCrush1970 04-26-2008 06:12 PM

Re: Just a rant
 
That's too bad. I have never called them up, but have ordered some parts from them w/ no problems to date. Bad customer service can put a big dent in a companies reputation. Write them a letter.

1956cameo 04-30-2008 12:17 AM

Re: Just a rant
 
I stopped using LMC a long time ago. I called one day to see if they had a certain part that wasn't in the catalog. The lady quickly said in a why are you bothering me voice; "If you dont see it in the catalog then we dont sell it." Thats fine, but then she immediately hung up on me before I had a chance to respond. So I sent a letter explaining what happened along with the page from my Chevy Duty catalog that says "If you dont see it in the catalog, call us we can find it for you." LMC is too expensive anyways, almost everyone is cheaper than them.

Mr79C10 05-09-2008 12:33 AM

Re: Just a rant
 
Ill rant with ya.
Last year I bought 2 NEW tail lights.
And then sent them to me.
The sent me 2 different tail light by 2 different manufactures. You would think that the "employee" pulling the order would at least try to get 2 tail lights by the same manufacture??
And yes they do look a bit different,,

dammitmitchell 05-25-2008 05:09 AM

Re: Just a rant
 
i ordered parts for a ranger (seriously i know) and my truck for the steering tierod ends, i asked for the complete outers on both )both were bent and or rusted preetty bad)
and they sent me "inners" (or they say) but the bolts and boots and parts jsut dont match either truck my chevy or the ford..
grrrr
and it costs money to ship it back sooo what's the point?
80 bucks down to the bucket of random bolts
grrr

dammitmitchell 05-25-2008 05:10 AM

Re: Just a rant
 
OHHH and i ordered doorpanels
for a 91 (they had them) and they sent them to me wrapped ONCE in cardboard with tape and a bag over it one was completely crushed i "doublebubbled" one back to good condition but the shattered one was completely wrong anyway
soo yeah.. they refunded ONE door pannel...
and never sent a new one..
grrr

wildmanaaron 06-03-2008 10:43 PM

Re: Just a rant
 
But people still buy from them, and I don't know why.

ksjh1316 06-06-2008 11:51 PM

Re: Just a rant
 
Because they are not too bad if you are local and can pick it up yourself and see it before you buy it. I would rather buy from other sources but sometimes you need the stuff that day.

kdrodworks316 06-07-2008 07:22 PM

Re: Just a rant
 
I am glad to hear I am not the only one to be screwed by LMC. I always use classic parts, but they were out of stock on cab supports for my burb. So I called LMC and they had them, they also cost $35 more than the classic parts and the shipping was also double. About $62 total more than the same parts from classic parts and they fit like crap. I know thats the way repop parts are, but everything I have purchased from classic parts fit great and worked with the parts they mate to. then throw in the LMC cab supports that are not even close to fitting with out the hammer and body saw. Their customer service reps are among the rudest people I have ever had to order parts from. This woman treated my like I was stupid and deaf. I was so Fn pissed when I hung up I wanted to call back and cancel the order, but I needed the parts and no one else seemed to stock them. oh well, learn from life. It will be the last purchase I ever make from them. I really hope they read this thread and realize the people that keep them in business are going elsewhere to spend their money. I had better stop now , I getting pissed again thinking about it and I wanna call them and yell at someone.

dieselarmy13 06-07-2008 07:29 PM

Re: Just a rant
 
Three words.... Early Classic Enterprises. They might not have the best website or catalog, but if you call them, they will hook you up.

chipflyer 06-16-2008 09:32 PM

Re: Just a rant
 
LMC is terrible, If you are local you might try,
1. Classic Parts of America KC Mo (formerly Chevy Duty AND they support this site)
2. Manes Truck parts KC MO
3. Jim Carter Classic truck parts KC Mo
4. Bowtie bits Wichita KS

If you need to order, Wes at Classic Heatbeat, GMC Pauls, or Tim Christian are excellent people to deal with and they support this site.

Just my opinion.

Jeff

hotrod 80 06-19-2008 03:21 AM

Re: Just a rant
 
I had never ordered from them before last friday . I was talking to a guy in the body shop that had there catolog and gave me the copy . I called for the passenger side door lock lever . i told the lady on the phone " just go ahead and send me both the right and left side , I want the driver AND passenger side so you I am sure to get the one I need " . Got the envolope yesterday , 2 driversides . Argh ! Called them back . Lady seemed nice and all , but still waiting on the part and I paid extra to get both sides .

Sinisterspeed 07-02-2008 12:18 AM

Re: Just a rant
 
I too have called them about a specific part and got the well is it in the catalog. I said well sort of, Thats why I am calling you. I want to make sure that what I am looking at is what I need. No help from LMC they said if I received it and it wasn't what I needed I could send it back at my expense. I ask myself wouldn't it be easier if you just told me if the part fits this or looks like this? I don't even remember what the part was now but I hung up and have never called or ordered from them.


All times are GMT -4. The time now is 11:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com