The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   Doin '69 (https://67-72chevytrucks.com/vboard/showthread.php?t=586803)

Draggin A$$ 06-30-2013 03:23 AM

Doin '69
 
So, I was goofing off on Craigslist a few weeks ago and found this. A 1969 Chevy C10 with a 307 and a 3 speed manual. It looked pretty clean in the pics so I hit the guy up and went out to take a look.

Talking to the guy he said it just had a new electric fuel pump and battery, but it had a blown head gasket(no biggie). I spent about 2 hours going over it looking at everything front to back and inside out. There was very little rust. The worst of it was on the doors. So being the semi-ass that I am, I lowballed him pretty good and he came back with not much of a counter offer. The deal was done. I picked it up for a whopping $400 big ones. On the way home picked up a complete engine gasket and seal kit, head bolts, oil filter and a thermostat and spent another $75. I'm in this thing for $475 now.

Here are the pics

http://i272.photobucket.com/albums/j...ps41e9c455.jpg
http://i272.photobucket.com/albums/j...ps35207c36.jpg
http://i272.photobucket.com/albums/j...ps5c6eb2bf.jpg
http://i272.photobucket.com/albums/j...psb49d9a77.jpg
http://i272.photobucket.com/albums/j...ps1f5099a3.jpg
http://i272.photobucket.com/albums/j...ps5b0d6d24.jpg

I know it flipped at least once
http://i272.photobucket.com/albums/j...psa90db35b.jpg
http://i272.photobucket.com/albums/j...psc93b9a63.jpg
http://i272.photobucket.com/albums/j...psa5a10691.jpg
http://i272.photobucket.com/albums/j...ps169858b3.jpg
http://i272.photobucket.com/albums/j...ps9fe25d0e.jpg
http://i272.photobucket.com/albums/j...ps230d9431.jpg
http://i272.photobucket.com/albums/j...ps479a7448.jpg

And yes my former pride and joy the S14 was kicked out of the garage

http://i272.photobucket.com/albums/j...ps2abec2f7.jpg
http://i272.photobucket.com/albums/j...ps1842fcfb.jpg
http://i272.photobucket.com/albums/j...ps648779fc.jpg
http://i272.photobucket.com/albums/j...pscd903c7f.jpg
http://i272.photobucket.com/albums/j...ps6fab2aaa.jpg


As of now only plans are too:

reseal the motor and clean it
clean and seal the frame
clean and repaint the engine bay
make the interior mint
fix the rust on the doors and dent
wheels (big chrome rims or old school with big white walls)

Down the road SLAM IT and make it a Sled.

Next day I did about an 45 minutes worth of work and got this for. The heads are unbolted and read to be pulled. I got hungry so I stopped.

http://i272.photobucket.com/albums/j...psc65f0dd5.jpg

Ok got the heads off and here's what it looked like.

8, 6, 4, 2(L-R)
http://i272.photobucket.com/albums/j...ps153ee0e3.jpg

1, 3, 5, 7(L-R)
http://i272.photobucket.com/albums/j...ps4263aefc.jpg


http://i272.photobucket.com/albums/j...ps5982a2e7.jpghttp://i272.photobucket.com/albums/j...pse2f98b5c.jpghttp://i272.photobucket.com/albums/j...pse2ee8ab9.jpg

I left for Yellowstone on the 21st of June and got back on the 26th. When I got back I finish cleaning up the heads, intake mani, block and oil pan then she'll be put back together.

This is were I'm sitting with it right now. The heads are back on just need to torque them down(forgot to get a torque wrench from work). I should have it done and running by Monday.

knomadd 06-30-2013 09:51 PM

Re: Doin '69
 
Congrats on the purchase and :welcoem: to the board.

Draggin A$$ 07-01-2013 01:39 AM

Re: Doin '69
 
Quote:

Originally Posted by MJs69CST (Post 6149542)
Looks like a nice start.
Posted via Mobile Device

Quote:

Originally Posted by knomadd (Post 6150640)
Congrats on the purchase and :welcoem: to the board.

Thanks Guys!


A few days ago I went ahead and pulled the front end off and pushed it outside to hose it down.

http://i272.photobucket.com/albums/j...psec20273e.jpg

http://i272.photobucket.com/albums/j...ps0db12749.jpg

Today I spent about 30 minutes and put the heads and intake on.

http://i272.photobucket.com/albums/j...psaf34d622.jpg

I still have the timing chain cover gasket and oil pan gasket to change out and she'll be good to go.

BP68 07-01-2013 01:19 PM

Re: Doin '69
 
Nice little build you have there. Keep the pics coming

Draggin A$$ 07-01-2013 02:29 PM

Re: Doin '69
 
Thanks! I sure will!

Draggin A$$ 07-17-2013 01:05 AM

Re: Doin '69
 
Well it's been awhile since I've updated this.

I got the motor back together and running now. Now I'm cleaning up the wires and fixing some cut and burnt wires.

http://i272.photobucket.com/albums/j...psd6a60986.jpg
http://i272.photobucket.com/albums/j...ps04059466.jpg
http://i272.photobucket.com/albums/j...ps38517d63.jpg

When I was taking off my Y-pipe it just fell apart so I broke down and got some of these

http://i272.photobucket.com/albums/j...psb4695ae0.jpg
http://i272.photobucket.com/albums/j...ps667eb437.jpg
http://i272.photobucket.com/albums/j...ps3a603a9f.jpg

While I had it outside power washing the truck, I decided to hit up the interior. Here are some before and after pics.

http://i272.photobucket.com/albums/j...psbc7d189e.jpg
http://i272.photobucket.com/albums/j...ps06276d5a.jpg
http://i272.photobucket.com/albums/j...ps9bbbe169.jpg
http://i272.photobucket.com/albums/j...ps1b2f754e.jpg
http://i272.photobucket.com/albums/j...pse1c88b39.jpg
http://i272.photobucket.com/albums/j...psd979fd79.jpg
http://i272.photobucket.com/albums/j...ps9249c74e.jpg
http://i272.photobucket.com/albums/j...psaa7ed303.jpg

Once everything was the cab was cleaned out I found 2 small rust holes in the front corners of the cab and the floor and fire wall seam had split. Here was my fix for the seam.

http://i272.photobucket.com/albums/j...ps3bf14991.jpg
http://i272.photobucket.com/albums/j...psfd39f288.jpg
http://i272.photobucket.com/albums/j...ps6b339b37.jpg
http://i272.photobucket.com/albums/j...ps1c9719d5.jpg
http://i272.photobucket.com/albums/j...ps29710341.jpg

Now that that was done and while I was welding it up I saw the rust on the vents. I pulled the blower box off and found more leaves and dirt. I was so bad the blower wouldn't turn and the baffle door wouldn't open. But this is what I found in the cab.

http://i272.photobucket.com/albums/j...ps3819d90f.jpg
http://i272.photobucket.com/albums/j...psd801de49.jpg
http://i272.photobucket.com/albums/j...psa239d3b2.jpg
http://i272.photobucket.com/albums/j...ps9b31f63b.jpg
http://i272.photobucket.com/albums/j...ps7ec17acf.jpg

I want to keep my blower box. If I cut out the rust and seal up the vent holes. Would it become an problem for the Blower?

Draggin A$$ 07-26-2013 01:23 AM

Re: Doin '69
 
This week I've been slowly working on the rust.

Here is the passenger side.
http://i272.photobucket.com/albums/j...ps04d7ae4b.jpg
http://i272.photobucket.com/albums/j...ps734eb0b9.jpg
http://i272.photobucket.com/albums/j...psdaed06ef.jpg
http://i272.photobucket.com/albums/j...ps2b6711d0.jpg

Drivers side
http://i272.photobucket.com/albums/j...psc1c54f8a.jpg
http://i272.photobucket.com/albums/j...ps37897147.jpg
http://i272.photobucket.com/albums/j...psd4c3e532.jpg
http://i272.photobucket.com/albums/j...ps5f3dfb6c.jpg

Started patching up the passenger side vent. Yes, the welds look like crap, I was having issues getting in there at a good angle.
http://i272.photobucket.com/albums/j...ps7171cd83.jpg
http://i272.photobucket.com/albums/j...ps4d871aa5.jpg
http://i272.photobucket.com/albums/j...ps256c99f2.jpg
http://i272.photobucket.com/albums/j...psc9d64976.jpg
http://i272.photobucket.com/albums/j...psc2b7aaa7.jpg

Coated up
http://i272.photobucket.com/albums/j...ps6f17abb7.jpg
http://i272.photobucket.com/albums/j...ps7d8087ef.jpg
http://i272.photobucket.com/albums/j...ps03dbb4d8.jpg

And the outside patched up and coated
http://i272.photobucket.com/albums/j...psce983d16.jpg
http://i272.photobucket.com/albums/j...psb0dce022.jpg
http://i272.photobucket.com/albums/j...pscc75c7f4.jpg

I'm hoping to have it all done this weekend so I can start driving it. I need to park my car, its killing me on gas.

dr69burb 07-27-2013 11:04 AM

Re: Doin '69
 
Nice truck man. Great deal.
Posted via Mobile Device

Draggin A$$ 10-08-2013 02:15 AM

Re: Doin '69
 
So, its been a long while since I've updated on the truck.

I got pretty much all the rust on the cab taken care of. I got the rest cut out and patched and welded up. After I was done I went sprayed it down with a nice undercoating for now till I get some carpet and stuff.

I also ran in to another problem with the motor. I think my heads are worpped enough to let coolant into the oil pan and into the exhaust. Oil isn't getting into the coolant, just coolant in to the oil. I'm going try getting the heads machined then go from there. If that doesn't work, I think a 350 or 454.

But here are some pics of whats been done.


http://i272.photobucket.com/albums/j...psbc7d189e.jpg


http://i272.photobucket.com/albums/j...ps1b2f754e.jpg

http://i272.photobucket.com/albums/j...psd979fd79.jpg

http://i272.photobucket.com/albums/j...pse1c88b39.jpg

http://i272.photobucket.com/albums/j...ps06276d5a.jpg

http://i272.photobucket.com/albums/j...ps9bbbe169.jpg

http://i272.photobucket.com/albums/j...psaa7ed303.jpg

http://i272.photobucket.com/albums/j...psd4c3e532.jpg

http://i272.photobucket.com/albums/j...ps37897147.jpg

http://i272.photobucket.com/albums/j...psc1c54f8a.jpg

http://i272.photobucket.com/albums/j...59bbe327-1.jpg

http://i272.photobucket.com/albums/j...85d3d838-1.jpg

http://i272.photobucket.com/albums/j...e0d44084-1.jpg

http://i272.photobucket.com/albums/j...d25bc7ed-1.jpg

http://i272.photobucket.com/albums/j...3b5b42e7-1.jpg

http://i272.photobucket.com/albums/j...38a91ba0-1.jpg

http://i272.photobucket.com/albums/j...adace0e8-1.jpg

http://i272.photobucket.com/albums/j...09537763-1.jpg

http://i272.photobucket.com/albums/j...2b0665d3-1.jpg

http://i272.photobucket.com/albums/j...efce62d0-1.jpg

http://i272.photobucket.com/albums/j...cc0502ad-1.jpg

http://i272.photobucket.com/albums/j...761467de-1.jpg

http://i272.photobucket.com/albums/j...d12a7ea2-1.jpg

http://i272.photobucket.com/albums/j...80df2807-1.jpg

http://i272.photobucket.com/albums/j...368928f9-1.jpg

And here's the motor again
http://i272.photobucket.com/albums/j...2ae58a85-1.jpg

http://i272.photobucket.com/albums/j...a7eb4acb-1.jpg

http://i272.photobucket.com/albums/j...2a18ca50-1.jpg

http://i272.photobucket.com/albums/j...f7ff1b6c-1.jpg

http://i272.photobucket.com/albums/j...e48e5719-1.jpg

http://i272.photobucket.com/albums/j...72d33820-1.jpg

http://i272.photobucket.com/albums/j...4319cb87-1.jpg

So, while I'm waiting on the heads to get done I'm going to start shaving the cowling and side makers and whatever else I decide to seal up.

Draggin A$$ 12-21-2013 04:17 AM

Re: Doin '69
 
Not much to update but here are some pics of the cowling I've been working on. Its not finished yet, I had to make some money by custom making some exhaust for a coworker.

http://i272.photobucket.com/albums/j...ps779148c2.jpg
http://i272.photobucket.com/albums/j...ps22d105d3.jpg
http://i272.photobucket.com/albums/j...psa08f438d.jpg
http://i272.photobucket.com/albums/j...psc07137ba.jpg
http://i272.photobucket.com/albums/j...ps1ef5d890.jpg
http://i272.photobucket.com/albums/j...psef760704.jpg



Here are some pics of the motor being torn down to be taken to the machine shop.

http://i272.photobucket.com/albums/j...psf06ca94f.jpg
http://i272.photobucket.com/albums/j...ps983db036.jpg
http://i272.photobucket.com/albums/j...psf7cb22fd.jpg
http://i272.photobucket.com/albums/j...ps1a9d8dbb.jpg
http://i272.photobucket.com/albums/j...psd28edc0c.jpg
http://i272.photobucket.com/albums/j...ps8f0d003e.jpg
http://i272.photobucket.com/albums/j...psab65b3b4.jpg
http://i272.photobucket.com/albums/j...ps4143d231.jpg
http://i272.photobucket.com/albums/j...pseb857299.jpg
http://i272.photobucket.com/albums/j...ps1cb95a2a.jpg
http://i272.photobucket.com/albums/j...ps7e7bb2cc.jpg

One of these days I'll learn not to use my cell phone to take pics.

low&slow 12-22-2013 06:59 PM

Re: Doin '69
 
What's your plans for the truck?

Mountain Home huh? I'm not to far from there.

Draggin A$$ 12-22-2013 09:53 PM

Re: Doin '69
 
Right now just get the motor in and running. Long term, I'm going to bag it and redo the interior. Then, I'll see where I go from there.

Yeah, I'm here until June.

70c10stepside 12-22-2013 10:07 PM

Re: Doin '69
 
Real Kouki car? Or converted? What motor you running? Good looking car.. Good seeing one that isn't a drift missile lol Also good deal on the truck! Came out winning for sure

Draggin A$$ 12-22-2013 10:17 PM

Re: Doin '69
 
Thanks! Its a converted kouki. I have an SR20 in it with a Holset HX45 waiting to go in.

70c10stepside 12-22-2013 10:58 PM

Re: Doin '69
 
When you get that in your gonna have your hands full! Awesome car man

Draggin A$$ 12-22-2013 11:06 PM

Re: Doin '69
 
Yeah, the last SR I built in Japan put 473 at the wheels but there was too much lag with the set up I had. So, I'm going to run the Holset this time to get rid of some of it. I run autocross and drift with the car so I want more response.

JD'S 69 12-23-2013 03:25 PM

Re: Doin '69
 
Nice work on the truck. Keep the pictures coming.:chevy:

Draggin A$$ 12-24-2013 02:56 AM

Re: Doin '69
 
Quote:

Originally Posted by JD'S 69 (Post 6431754)
Nice work on the truck. Keep the pictures coming.:chevy:

Thanks! Will do!

Draggin A$$ 01-04-2014 10:08 PM

Re: Doin '69
 
Sad day!! I put my tranny on my engine stand to clean it. So, every time I would rotate I would hear jingling from inside of it. I popped the cover off to find a lot of needle bearing just hanging out in there. Not exactly sure where they came from or how bad it is. I just stopped and walked away.

My thoughts are to go ahead and do a TH350 or 700R4 swap or should I rebuild it? I'll be driving the truck to Texas in May/June time frame. I'll also be towing my car with it. Any thoughts?

low&slow 01-04-2014 10:34 PM

Re: Doin '69
 
Quote:

Originally Posted by Draggin A$$ (Post 6450742)
Sad day!! I put my tranny on my engine stand to clean it. So, every time I would rotate I would hear jingling from inside of it. I popped the cover off to find a lot of needle bearing just hanging out in there. Not exactly sure where they came from or how bad it is. I just stopped and walked away.

My thoughts are to go ahead and do a TH350 or 700R4 swap or should I rebuild it? I'll be driving the truck to Texas in May/June time frame. I'll also be towing my car with it. Any thoughts?

I say go with a 700R4. Mine loves the highway. My th400 and th350 don't really like the highway all that much, but they do a lot better towing than the 700R4 does. I'm by all means no expert when it comes to tranny's, but that's mu $0.02

Draggin A$$ 01-04-2014 10:57 PM

Re: Doin '69
 
Thanks! Yeah, I'm thinking I'm gonna go with the 700R4. I had one in my S10 behind a 383 and it did really good. I just need to find one.

knomadd 01-04-2014 11:36 PM

Re: Doin '69
 
I think the silverado's of the early 90's used the 700r4. They seemed to tow just fine. I'd put in a 700r4 anyway for the overdrive. That's what I'll do when I switch.

low&slow 01-05-2014 12:38 AM

Re: Doin '69
 
Quote:

Originally Posted by knomadd (Post 6450888)
I think the silverado's of the early 90's used the 700r4. They seemed to tow just fine. I'd put in a 700r4 anyway for the overdrive. That's what I'll do when I switch.

Yeah that's why I recommended the 700R4 for the overdrive on the highway. Lowers the rpm at higher speeds.

Draggin A$$ 01-11-2014 02:32 AM

Re: Doin '69
 
I finally got to pick up my motor from the machine shop tonight. I got about 2 hours worth of work in. I got this far, maybe I can finish it up tomorrow. I'm still waiting on my oil filter adaptor to get here though.

Anyway here are pic!

http://i272.photobucket.com/albums/j...ps6668c08c.jpg
http://i272.photobucket.com/albums/j...ps408f0db2.jpg
http://i272.photobucket.com/albums/j...ps9430a7b0.jpg
http://i272.photobucket.com/albums/j...psa75de6d8.jpg
http://i272.photobucket.com/albums/j...ps2724e88d.jpg
http://i272.photobucket.com/albums/j...psbd3644e1.jpg
http://i272.photobucket.com/albums/j...psd39e9d0e.jpg
http://i272.photobucket.com/albums/j...pse7688889.jpg
http://i272.photobucket.com/albums/j...ps8b3b8c2d.jpg
http://i272.photobucket.com/albums/j...ps84409fc3.jpg



Oh on a side note, I got the tranny fixed and ready to go in.


All times are GMT -4. The time now is 09:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com