Big block oil pan
I'm putting a big block in my 67 stepside I'm wondering how big an oil pan will fit with out hitting the crossmember? It's a stroker so the bigger the better, I'm thinking of a moroso ultimate II. I just don't know if it will fit? Also has anyone ever put a dry sump system in these trucks?:metal:
|
Re: Big block oil pan
Dry stump is big bucks. If you want more clearance swap in a 73-86 crossmember, it will give you some more room and more oil pan options
|
Re: Big block oil pan
I have a dry sump for it I just didlen't think it would fit with the pump. I did not know 73-86 fit what's different?
|
Re: Big block oil pan
I have a moroso deep pan on my 454, I dont know what crossmember this is out of I cant say for sure because when i bought the truck it had this crossmember, but it was cut in half right down the middle..so i bent some metal and patched it. It has the early model motor mounts. here it is: http://img244.imageshack.us/img244/1...o012fb0.th.jpg
|
Re: Big block oil pan
I have a Moroso 6 qt. pan on my big block with no modifications to the cross member. Had to pull the motor to put it on though.
|
Re: Big block oil pan
I have a kicked out sump 8qt ebay pan on my 454 and it clears the original crossmember.
|
Re: Big block oil pan
Thanks for the input guys! Clay do you mean you have this oil pan on ebay now? or you got it on ebay? Does any one else have pictures of there big block pan in the truck with stock crossmember? I'm looking to see how big a kick out I can get on it with out hitting crossmember....:metal:
|
All times are GMT -4. The time now is 10:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com