Re: 72 k20 project
 

did a little work today.

gutted a beat up dodge.

http://i94.photobucket.com/albums/l8...ruck/001-8.jpg

http://i94.photobucket.com/albums/l8...ruck/002-6.jpg

the engine has the beautiful cake of oil/coal dust in the oily areas. holy crap. next weekend its going for a solid power wash

http://i94.photobucket.com/albums/l8...ruck/003-4.jpg

i also think i found a good strait rust free bed locally for a very good price...

Ryan

Re: 72 k20 project
 

had alot of running around to do yesterday. i think i drove 160 miles and never left La Plata county. i did manage to accomplish a couple things.

i got this hauled to the car wash and blasted a thousand pounds of grime away

http://i94.photobucket.com/albums/l8...ruck/001-9.jpg

i also borrowed an engine hoist. hopefully later today i can maybe do something with that.

i got all the remnants of broken dodge scraped out of my driveway. i am sure the neighbors are proud of that.

then, in fine form my white truck had to make a rescue run

http://i94.photobucket.com/albums/l84/ryanroo/001.jpg

my buddies powerstroke started retching oil. talk about a heavy long MFer. that is now beached in my driveway and is part of todays project.

Ryan

Re: 72 k20 project
 

since i spent most of the time i had allotted for mocking up the engine sunday trying to fix a bleeding ford, i decided to play around a bit tonight.

it is sitting on blocks under the pan on top of the springs.

http://i94.photobucket.com/albums/l8...uck/001-10.jpg

this is no where near final position just got it under there and off the hoist so i can fiddle with position and all that.

http://i94.photobucket.com/albums/l8...ruck/002-7.jpg

current engine mount system...

http://i94.photobucket.com/albums/l8...ruck/003-5.jpg

it will all end up a little further back and it has to come up in the front but this is pretty close to the height of the back of the trans. looks like the floor is going to get the custom touch as well as the firewall

http://i94.photobucket.com/albums/l8...ruck/004-2.jpg

ryan

Re: 72 k20 project
 

Looking good! It'll ride like that for a few bounces. :lol: And yeah, those super dutys are heavy!

Re: 72 k20 project
 

thanks

spent a few minutes after work today and whacked out some stuff for the engine mounts.

hopefully i can add some of the more vital stuff to it tomorrow and give a better idea of the finished product. some of the additional ingredients are visible in the second photo

http://i94.photobucket.com/albums/l8...uck/001-11.jpg

http://i94.photobucket.com/albums/l8...ruck/002-8.jpg

ryan

Re: 72 k20 project
 

Very nice. Are the bushings energy suspension bushings for leaf springs or shackles? I've thought about doing it this way before.

Re: 72 k20 project
 

they are leaf spring t-bushings. im not sure the brand but they are poly.

i got some more work on the engine mounts done.

http://i94.photobucket.com/albums/l8...ruck/002-9.jpg

http://i94.photobucket.com/albums/l8...uck/001-12.jpg

i have a set of red and a set of black... i need to get a set of matching colors.

http://i94.photobucket.com/albums/l8...ruck/004-3.jpg

tried for a weld shot but i cant get my camera to do this well

http://i94.photobucket.com/albums/l8...ruck/003-6.jpg

and on the engine.

http://i94.photobucket.com/albums/l8...ruck/005-3.jpg

http://i94.photobucket.com/albums/l8...ruck/006-2.jpg

ryan

Re: 72 k20 project
 

Very nice fab work! You hae to love tigs!

Re: 72 k20 project
 

progress this morning

the beginning

http://i94.photobucket.com/albums/l8...uck/001-13.jpg

WTF

http://i94.photobucket.com/albums/l8...uck/002-10.jpg

that allowed for this

http://i94.photobucket.com/albums/l8...ruck/004-4.jpg

from the engine side

http://i94.photobucket.com/albums/l8...ruck/003-7.jpg

then with the height and setback of the engine that pesky frame was in my way.

http://i94.photobucket.com/albums/l8...ruck/005-4.jpg

this is like those purple lines the plastic surgeons on tv use to decided where to slice and dice their victims

this is the resulting carnage

http://i94.photobucket.com/albums/l8...ruck/006-3.jpg

i used all of that cutoff wheel that i could

more to come later hopefully. off to the gym and grocery store to stock up for the week

ryan

Re: 72 k20 project
 

patched up the holes

http://i94.photobucket.com/albums/l8...uck/001-14.jpg

smoothed it down

http://i94.photobucket.com/albums/l8...ruck/003-8.jpg

ryan

Re: 72 k20 project
 

real nice.

Re: 72 k20 project
 

Very nice work! You going to run a mechanical fan?

Re: 72 k20 project
 

Thanks guys.

i am planning on the mechanical fan. all of my experience with electrics has been that they are never enough. mechanical fans move air very well. shrouds are easy to make and i will have more than enough room as it looks now.

Ryan

Re: 72 k20 project
 

You should have plenty of room for sure now. :lol:

Re: 72 k20 project
 

i should hope... i didnt realize i hadn't posted the pics with the engine in its resting place.

the notches in comparison to the parts that got in the way

http://i94.photobucket.com/albums/l8...uck/001-15.jpg

this is with the fan on so you get an idea of the rad clearance. rad should be roughly centered on the body mts.

http://i94.photobucket.com/albums/l8...uck/002-12.jpg

ryan

Re: 72 k20 project
 

Very nice work!

Re: 72 k20 project
 

Awesome build! I like how you went about boxing the frame!

Re: 72 k20 project
 

thanks.

i still have to finish boxing the rear but i got all twitterpated with m engine mounts so i haven't finished up back there yet. i am going to get a bed for it before to long, so i need to get on it.

Ryan

Re: 72 k20 project
 

i kept having issues deciding what transfer case to use and what i was going to do for exhaust kept nagging away at me. so after a little discussion with Ryan and his brother the other night about the strength merits of using the np241 i decided to go that route. most of the 241s out there are drivers side F/O. the solution is to clock the dodge case all funny and rework the oil pickup and the shifter. that sounded like to much of an aggravation to me. my personal solution was...

http://i94.photobucket.com/albums/l8...ruck/004-5.jpg

http://i94.photobucket.com/albums/l8...ruck/003-9.jpg

http://i94.photobucket.com/albums/l8...uck/002-13.jpg

now i will be able to use the dodge t-case which is not only better able to hold the torque, but as a design attribute is quieter going down the road and shift on the fly. i also have the strength advantage of the reverse cut gears and my driveline angle should be near flat. i can also use a trash can for exhaust and have no fitment issues. that may be the deciding factor in my turbo choice down the road


Ryan

Re: 72 k20 project
 

Ha Ha very nice bro! That's a great score right there! Great work as well, it's coming along real nice! Maybe if we both get ours running this year we can meet up some place.

Re: 72 k20 project
 

Thanks!

i hope i get it up and going this year, but that depends a lot on many other things.

i had the same thought and Lauren(wife) and i will be driving back to iowa when its finished an debugged. the truck was my grandpa's and i really want to give grandma and my dad a ride when its back to being a nice truck inspired by grandpas plans and built to suit me. they are really the only other two people that have any attachment to the truck in my family outside of my mom and sisters who just enjoy the pictures of the build.

Ryan

Re: 72 k20 project
 

I like what you are doing, kooks very nice

Re: 72 k20 project
 

That is very cool! The only person attached to mine is me. :lol:

Re: 72 k20 project
 

:lol: my wife is getting interested in mine. She asked for a list of things that she can do on it.

Re: 72 k20 project
 

Nice. Lauren likes to hang out and help, and she wants to learn. she just doesn't have much in the way of knowledge.

Ryan