Column shifter swap
http://i1183.photobucket.com/albums/...5529A3D713.jpg
Any idea of how hard it is to swap out the factory shifter to a billet? A buddy said it's easy and all I gotta do is remove the pin and swap them out.. Tried the search option but no luck... Thanks |
Re: Column shifter swap
Use a hammer and a punch to knock the pin on the stock shifter where the shifter mounts to the collar on the column. Super simple.
|
Re: Column shifter swap
I did that and sure was super simple.. This shifter input shaft is to short so back to the drawing board!! Gonna take the factory shifter and figure out a way to use that shaft that goes into the column on the billet shifter.. Either machine it down or weld it
|
Re: Column shifter swap
Do you have a tilt column? The shift levers are different between a tilt and non tilt column. I think that looks like a tilt column shift lever.
|
Re: Column shifter swap
No I don't have a tilt column.. I should be able to install it in the next few days.. Gonna see what my buddy who's a machinist can figure out
|
All times are GMT -4. The time now is 04:57 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com