The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- S10 S15 Luv Blazer (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=130)

- - Sway Bar Width? (https://67-72chevytrucks.com/vboard/showthread.php?t=812050)

SCOTI

09-16-2020 08:33 PM

Sway Bar Width?

Is there an S10 aficionado in house that might have a sway bar they could measure the width (end-link center to end-link center)?

I measured an aftermarket C10 spec bar as well as a 3rd GEN f-body 1Le/36mm bar by placing them on the garage floor surface & marking the concrete w/a Sharpie. I want to compare an S10 as well.

GRADYS Performance

10-12-2020 11:06 AM

Re: Sway Bar Width?

I can help you with that. I will send a PM

SCOTI

10-12-2020 11:12 AM

Re: Sway Bar Width?

I was able to measure one off of a 94-02 S10 truck. It was ~41.5 which was still too wide for my application @ ~39".

GRADYS Performance

10-12-2020 11:46 AM

Re: Sway Bar Width?

Ok.

All times are GMT -4. The time now is 09:34 AM.