My new project truck!
A few weeks ago I was driving across state with my kids, and noticed an old GMC dually flatbed truck sitting in a field on a farm. We continued on our journey, but I could NOT get that truck out of my mind the entire weekend. I have been wanting a 1967 Chevy C30 for some time, however this was an unknown year GMC, and on the return trip we drove past it again.
We came to a crossroads with a stop sign, and I turned to my kids and said, "We are going back to look at that truck!" I did a U turn and drove back to the farm. I was able to locate the owner/farmer and asked him about it. Unbelievably, It turned out to be EXACTLY the year I wanted! A 1967 GMC 3500 1-Ton! It did not run (it ran until it sat for 10 years), and he was asking $800 for it. I told him I would think about it and got his card. Several days later I called him with a counter-offer of $400, and he countered with $600. I told him I would think about it, and was going to hang up, but he then said, "$500". We settled on it, and I drove there, paid him, and secured the title. Days later I had it towed to my house. It took several hours to clean that cab out. It was FULL of squirrels (or possibly rats) nests, mud wasp nests, paper, farm tools, and junk. It filled up my large shop vac twice. My son and I removed the old dilapidated seat, then resumed shop-vacuuming the cab floor. The cab floor is very rusty (as can be expected) but that will have to be somehow dealt with later. Then we unhooked the gas line, removed the gas tank, and dumped its trash-gas into a bucket. That stuff was no longer gas, and there was no rust in the tank (a big surprise). The rodents had chewed some spark plug cables, so I replaced those. Some moron previous potential buyer had broken out the factory key switch trying to start the truck. The next day I took out the nasty rusted idiot light gauge pod, and removed the dash pad (and found that the original factory color was light gray). Those rodents had also chewed some wires behind the gauge pod, but they were 98% intact. I changed the oil (with a quart of Marvel Mystery Oil), and put on new battery cables (have not bought a battery yet). I also turned the crank with a socket wrench on the crank bolt, and was able to get it to move (engine is not seized). Today I replaced the spark plugs, and repinned the gauge socket to work with my factory gauge pod that I bought and saved years ago. Next up is to buy a battery, and get the carb rebuilt. I may replace the distributor since it is points system (I hate those). Once all of these things are done, THEN I will attempt to start it. But for now it is the "purifying" process of draining old fluids, and fixing the wiring system. This has been FUN!!! https://imagizer.imageshack.com/v2/1...923/UAyPGa.jpg |
Re: My new project truck!
Good luck with your new project!Looking forward to your progress.Can't wait to hear the details on what engine/trans and what your plans are. Don't forget we like lots of pictures!
|
Re: My new project truck!
1 Attachment(s)
pic fa ya...
|
Re: My new project truck!
Quote:
|
Re: My new project truck!
awesome story, yer gonna have fun with this one. Did you say anything about needing a savings account for this project?! : >)
|
Re: My new project truck!
Quote:
More pictures are coming soon! |
Re: My new project truck!
https://imagizer.imageshack.com/v2/5...923/Zjwhnj.jpg
The old 350 engine https://imagizer.imageshack.com/v2/5...923/Tov95O.jpg Arrived at new home! https://imagizer.imageshack.com/v2/5...923/MrfADk.jpg Nasty interior! https://imagizer.imageshack.com/v2/5...922/avmkGO.jpg You is outta here seat! https://imagizer.imageshack.com/v2/5...924/t9G7Y8.jpg Gas tank eviction! |
Re: My new project truck!
https://imagizer.imageshack.com/v2/4...923/bah1mD.jpg
Trash gas https://imagizer.imageshack.com/v2/4...923/5sF9UZ.jpg Took out gauge pod. The kitten tried to help! https://imagizer.imageshack.com/v2/4...922/qqbeIa.jpg These are going to be replaced with a full gauge pod. |
Re: My new project truck!
Nice to see someone giving this one some love! Kitten looking for mice?
|
Re: My new project truck!
I think my kitten smelled the odor of tasty rodents inside the cab!
It cannot be seen in the pictures (thanks steering wheel!), but to the right of the brake pedal is some kind of protruding metal rod that looks like it was once another type pedal or something. Anyone know what it might be? I may post a picture later when I get home. |
Re: My new project truck!
I would guess it's the throttle pedal rod
|
Re: My new project truck!
Quote:
|
Re: My new project truck!
https://imagizer.imageshack.com/v2/4...923/45UCnS.jpg
Removing front lights begins... https://imagizer.imageshack.com/v2/4...922/urw9nA.jpg Front parking and signal lights. Fixing wiring is a pain. https://imagizer.imageshack.com/v2/4...924/ZVWaa0.jpg Amazing how bent the front bumper brackets are. Compare to the straight set. |
Re: My new project truck!
This truck has no junction blocks! Is this normal for 67s or someone's bad wiring idea?
I had the junction blocks removed from my 68 after I had that electrical fire that started at one of the blocks and they have been replaced with fuses and fusable links. Also, what kind of brake booster is that in the engine pic? |
Re: My new project truck!
I think I still have some front marker lights and maybe some chrome bezels if you'e interested. They won't be perfect, but they will be cheep!
Rg |
Re: My new project truck!
Quote:
|
Re: My new project truck!
I'll take a pic and post it.
Rg |
Re: My new project truck!
3 Attachment(s)
Bezels and grill
|
Re: My new project truck!
Quote:
'71 + '72 MY [unsure when change happened] had gas pedal hanging on pivot on firewall, action inside cab, and cable going to carb coming thru firewall. '67 GMC grille had black letters "GMC" stamped on center of grille -- usually painted white. Later models were chrome and had chromed hood letters. :gmc2: |
Re: My new project truck!
4 Attachment(s)
Here are some pictures of what '68OrangeSunshine described. The first picture is the back of the accelerator pedal. The second picture shows the firewall linkage and mounted ball studs. The third picture shows the mounted accelerator pedal. The forth picture is a small block throttle rod that goes to the carb from the firewall linkage.
Here's a link to Classic Industries showing most of the parts. https://www.classicindustries.com/sh...?q=accelerator |
Re: My new project truck!
All that being said, on my last engine rebuild, I converted to a GM '72 gas pedal and a Lokar throttle cable to overcome an L6 w/ side-mounted 4 barrel carb issue. The old way, with the throttle pushrod and _aftermarket bellcrank_, was too much of a Rube Goldberg affair, and frequently jammed, lost critical hairpin pieces, iced up and never got wide open throttle. Always at the most awkward times. Another gripe was that the OEM pedal [after about 250,000 - 300,000 daily driver miles] would pop off the outboard ballstud, fold under the throttle bail and jam the action. For a long time I ran with no gas pedal, and touched the wire bail with the ball of my foot. OK in town, but on a long drive -- Tucson to LA for instance -- I got fearsome foot, calf and knee cramps. Big wafflestomper hiking boots helped, sometimes.
But for stock applications, the '67-'68 gas pedal/throttle system works fine. |
Re: My new project truck!
Thanks for the gas pedal assistance gentlemen! I must add that to my ever-growing repair list!
**UPDATE** I went through the chewed wiring and fixed what I could figure out, then installed an ignition switch that I bought from a forum member. I still do not have working lights yet, but that will be dealt with later. I even plugged in my repinned gauge pod plug into my factory gauge pod, but no illumination lights came on when I tested it. Electrical gremlins be damned! I bought a new battery, installed that, then turned the switch. The engine turned over very strongly, so out of curiosity, I poured some gas into the carb (gas tank is still disconnected) to see if it would fire (it did not). So I decided to stick to my original plan, pulled out the carb and sent to a friend to be rebuilt. Next up I am installing a HEI distributor (as soon as someone comes to my house to show me step-by-step instructions), and a new fuel pump just to be on the safe side). After all of this I sure hope it fires up! Can anyone think of anything else mechanical that I probably should do to this beast that has not started in 10 years? |
Re: My new project truck!
Lookin good. You gonna keep the flatbed on it?
|
Re: My new project truck!
Quote:
|
Re: My new project truck!
Whats the radiator like?
Coolant (or water maybe) Water pump bearing... Clutch release ok? Exhaust pipes (especially the tailpipe) maybe full of stored materials... :chevy::chevy::chevy: |
All times are GMT -4. The time now is 05:03 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com