The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)

- - GA WTB: Overdrive Cable Clamp (https://67-72chevytrucks.com/vboard/showthread.php?t=795084)

cwcarpenter98

10-16-2019 11:13 PM

WTB: Overdrive Cable Clamp

2 Attachment(s)

I'm looking for the overdrive cable clamp that secures the cable at the solenoid.

I've included a pic of what I need and my current setup.

I could probably end up making one, but while I'm at school and don't have access to the stuff I need to make one, I figure I'll see if there's one out there somewhere

shortstep60

10-16-2019 11:50 PM

Re: WTB: Overdrive Cable Clamp

I have a over drive trans in a 65 will look and see if it has a clamp

cwcarpenter98

10-17-2019 01:39 PM

Re: WTB: Overdrive Cable Clamp

Quote:

Originally Posted by shortstep60 (Post 8610985)

I have a over drive trans in a 65 will look and see if it has a clamp

Thanks!

The Rocknrod

10-17-2019 04:10 PM

Re: WTB: Overdrive Cable Clamp

Will this work?
http://www.billstruckshop.com/Wholes...53%20(004).JPG
http://www.billstruckshop.com/60-66.html

cwcarpenter98

10-17-2019 07:39 PM

Re: WTB: Overdrive Cable Clamp

Thank you for the suggestion Rocknrod. I just went out to look at the size, and unfortunately the clamp is much bigger than the OD cable

cwcarpenter98

10-21-2019 12:01 PM

Re: WTB: Overdrive Cable Clamp

Still looking

shortstep60

10-21-2019 05:05 PM

Re: WTB: Overdrive Cable Clamp

Mine is gone sorry I could not help you
Posted via Mobile Device

cwcarpenter98

10-21-2019 07:35 PM

Re: WTB: Overdrive Cable Clamp

Quote:

Originally Posted by shortstep60 (Post 8613607)

Mine is gone sorry I could not help you
Posted via Mobile Device

Thanks for looking, I appreciate it

GMCNUT

10-28-2019 01:09 PM

Re: WTB: Overdrive Cable Clamp

Quote:

Originally Posted by cwcarpenter98 (Post 8611497)

Thank you for the suggestion Rocknrod. I just went out to look at the size, and unfortunately the clamp is much bigger than the OD cable

Just make your cable larger by adding some fuel line over it nice and snug, then stick that into the park brake cable clamp and tighten. a few rounds of Black Gorilla tape on the OD cable would also work

cwcarpenter98

10-28-2019 01:26 PM

Re: WTB: Overdrive Cable Clamp

Quote:

Originally Posted by GMCNUT (Post 8617424)

That is a good idea. I'll have to see if I can make it work next time I go back home. I don't have all my spare parts and such down here at college

cwcarpenter98

01-10-2020 02:48 PM

Re: WTB: Overdrive Cable Clamp

Still looking for the clamp

cwcarpenter98

03-08-2020 05:02 PM

Re: WTB: Overdrive Cable Clamp

Maybe someone has one that I could get some measurements off of so that I could make my own??

shortstep60

03-08-2020 06:54 PM

Re: WTB: Overdrive Cable Clamp

I have one on a four bolt over drive that I am going to sale. I will make one for you. Thanks for help me on my overdrive.

cwcarpenter98

03-08-2020 08:54 PM

Re: WTB: Overdrive Cable Clamp

Quote:

Originally Posted by shortstep60 (Post 8691300)

I have one on a four bolt over drive that I am going to sale. I will make one for you. Thanks for help me on my overdrive.

Thanks! I'm glad I could help ya with it. It was good talking to ya again as well :metal:

All times are GMT -4. The time now is 07:19 PM.