The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   NC WTB: NP205 mount and support rod (https://67-72chevytrucks.com/vboard/showthread.php?t=702059)

77K10Silverado 03-25-2016 09:05 AM
WTB: NP205 mount and support rod
 
Just what the title says. Looking for a frame mount and the rod that goes to trans.

MAXMAN 03-25-2016 10:07 AM
Re: WTB: NP205 mount and support rod
 
What transmission?

bulldozer1979 03-25-2016 10:28 AM
Re: WTB: NP205 mount and support rod
 
2 Attachment(s)
Is this the frame mount you are in need of ? PM me if it is, thanks

48cj2a 03-25-2016 11:04 AM
Re: WTB: NP205 mount and support rod
 
Here is what the rod to a THM400 looks like:

http://www.pirate4x4.com/forum/attac...upport-rod.jpg

esbstuff 03-25-2016 11:54 AM
Re: WTB: NP205 mount and support rod
 
Don't think I ever saw a 205/4-speed support rod... but i'm interested. Following...

MAXMAN 03-25-2016 12:11 PM
Re: WTB: NP205 mount and support rod
 
Had them for TH400 & TH350 on the earlier trucks when you still got a np205 in a 3/4 ton. I should have a strut, crossmember, converter cover, and strut braces that go to engine mounts for a TH400. Problem is, these are getting difficult to find--at least in my part of the country. I would have to get $250 shipped for the package. If you only need the strut and crossmember, I am probably not interested in breaking up the package.

77K10Silverado 03-25-2016 09:58 PM
Quote:
Originally Posted by bulldozer1979 (Post 7535004)
Is this the frame mount you are in need of ? PM me if it is, thanks
No, I have these already. Thx for the reply!
Posted via Mobile Device

77K10Silverado 03-25-2016 10:04 PM
Quote:
Originally Posted by MAXMAN (Post 7534988)
What transmission?
This was a factory TH350/350. I sold that and picked up a 27 spline np205. Was going to try and do the mods and mate it with a 700r4. To be honest, I'm not sure that I really need a brace. I may rig something up from scratch.
Posted via Mobile Device

77K10Silverado 03-25-2016 10:06 PM
Quote:
Originally Posted by MAXMAN (Post 7535099)
Had them for TH400 & TH350 on the earlier trucks when you still got a np205 in a 3/4 ton. I should have a strut, crossmember, converter cover, and strut braces that go to engine mounts for a TH400. Problem is, these are getting difficult to find--at least in my part of the country. I would have to get $250 shipped for the package. If you only need the strut and crossmember, I am probably not interested in breaking up the package.
I'm not quite sure of all the buzzwords you're using. Lol. Do you have pics??
Posted via Mobile Device

48cj2a 03-25-2016 10:55 PM
Re: WTB: NP205 mount and support rod
 
Didn't they stop using them after the HD K transmissions started or was that just the support rods from the flywheel cover up to the motor mounts?

CHEVY072481 05-04-2022 04:41 PM
Re: WTB: NP205 mount and support rod
 
Do you know the size of the bolts that go to the side transfer case support rod?

SunSoaked 05-05-2022 10:52 AM
Re: WTB: NP205 mount and support rod
 
One things for sure, the quickest way to crack the transmission housing is to add the side brace. There's a reason GM stopped using them.

SunSoaked 05-05-2022 10:55 AM
Re: WTB: NP205 mount and support rod
 
Quote:
Originally Posted by SunSoaked (Post 9075498)
One things for sure, the quickest way to crack the transmission housing is to add the side brace. There's a reason GM stopped using them.

And I just noticed this thread is 6 years old. lol


All times are GMT -4. The time now is 10:54 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com