Looking for a control arm mount bracket for 67 C10
 

Scratching my head on this one. Does anyone know where I could buy the mounting bracket for a 2wd short bed c10? So far all I see is newer model stuff and a couple of old dead links. Any help is appreciated.

Re: Looking for a control arm mount bracket for 67 C10
 

What exactly are we talking about

Re: Looking for a control arm mount bracket for 67 C10
 

The bracket/mount between the upper control arm and frame I believe.

Re: Looking for a control arm mount bracket for 67 C10
 

Please note you must be a subscribing member to post want to buy threads on this forum. Please look up and click on Subscribe and follow the directions to pay for a membership. You will then be able to post your want to buy post in the correct area.

Re: Looking for a control arm mount bracket for 67 C10
 

.
You could scour the parts sections here looking for it without being a paying member. Just asking "where" is OK too methinks if you don't know and want to know...

In that case...the salvage yards may be helpful in this case or even some of the Online yards may have something.

However if you want to post WTB then you need to pay up as stated!

-klb

Re: Looking for a control arm mount bracket for 67 C10
 

Looking for the dog bone or the bracket that’s riveted to the crossmember?

https://www.partsgeek.com/gbproducts...-05044701.html

Re: Looking for a control arm mount bracket for 67 C10
 

I think he's looking for the two greyed-out L-shaped brackets that don't have part numbers in the upper left hand corner of this page:

https://www.lmctruck.com/1967-72-che...-2-wheel-drive

Re: Looking for a control arm mount bracket for 67 C10
 

This makes it easier, this is the one I’m asking about

Re: Looking for a control arm mount bracket for 67 C10
 

My bad fellows, I was hoping for a link to an aftermarket supplier or just a part number.
That L shaped bracket in the LMC pic is what I am looking for I just didn't see a part number on their page and couldn't find it anywhere else.

Re: Looking for a control arm mount bracket for 67 C10
 

Call Bill - http://www.vintagechevytrucks.com/ bay area California but moving to Oregon.

Jason at Greens Restoration in Cameron TX 254-482-0186 Text.

Manes Truck Parts near Kansas City has used parts. manestruckparts.com

Pickmup is a member here in Olympia WA. https://www.facebook.com/pages/Frank...69528676394750

You could look here for venors that support this board, but it doesn't really help you find which ones have used parts = http://67-72chevytrucks.com/vboard/s...d.php?t=443539

Hopefully someone else will chime in with some of the other big user parts places contact info. They may even be one near you. What state is Greenwood in?

Re: Looking for a control arm mount bracket for 67 C10
 

What state are you from? I know of 2 trucks in a junk yard in Ruby S.C.

Re: Looking for a control arm mount bracket for 67 C10
 

That part is welded to the x-member and will have to sourced and torched off, and cleaned off. Try to find someone who has swapped out the entire x-member to convert to late model disc front end

Re: Looking for a control arm mount bracket for 67 C10
 

Thanks fellows, I am indeed in Greenwood SC.
Any info would be greatly appreciated, thanks guys.

Re: Looking for a control arm mount bracket for 67 C10
 

looks like Greenville is about 3 hrs from Ruby. We could meet there and go get your part or I can get it and you can pick it up from me. I think it might be to heavy to ship. D

Re: Looking for a control arm mount bracket for 67 C10
 

I’ll remove the rivets and send it it you needed

Re: Looking for a control arm mount bracket for 67 C10
 

Thanks guys I ended up finding a pair of brackets. I appreciate all the help.