The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Racing and high performance (trucks haulin more than hay) (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=60)
-   -   video of launch(no wheelie) (https://67-72chevytrucks.com/vboard/showthread.php?t=285805)

bigjimzlll 04-01-2008 06:04 AM

video of launch(no wheelie)
 
Click here to watch launch-540

Super73 04-01-2008 06:57 AM

Re: video of launch(no wheelie)
 
Can you please e-mail it to srstereo@hotmail.com I would like to slow it way down.. Looks like your spinning the tires right off the bat.

bigjimzlll 04-01-2008 07:58 AM

Re: video of launch(no wheelie)
 
yea it spins a little..kind of spin grab for a few feet. I'll try to send you the video

Super73 04-01-2008 10:30 AM

Re: video of launch(no wheelie)
 
Jim,

Watching it in slow-mo, This is what I see:

The tire gets 3 full rotations by the time it gets to where your front tire starts. And it starts to spin before your front end rises at all.

You really arent getting much front lift. Now we all know front lift doesn't need to be there if your dead hooking. But your not right now. Try loosening the front shocks up some.

There is no sepperation or really any squat in your rear. So I'm guessing you have about 100% antisquat. After loosening the front and trying that, try raising your ICG by moving the ladder bars up one hole. If it gets worse move them down 2 (one down from where they are now). See what that does.

But I think the first step would be to get that front moving up.


All times are GMT -4. The time now is 08:36 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com