The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)

- - 5 lug bolt patten (https://67-72chevytrucks.com/vboard/showthread.php?t=421097)

mcrich01

09-12-2010 09:16 PM

5 lug bolt patten

I have a 89 Burban with a 5 lug bolt patten how hard is it to change to a 6 lug patten???????

lolife99

09-12-2010 10:36 PM

Re: 5 lug bolt patten

Swap the axles and brake drums from a 4x4 rear axle.
The front can be done with a set of aftermarket 6-lug rotors that are used on the 67-70 disc brake conversion kits.
Early Classic Enterprises is a good source for the rotors. Just make sure your rotors are the 1.25" wide version, and it will be a bolt on.

mcrich01

09-13-2010 06:53 PM

Re: 5 lug bolt patten

Thanks Bro for the info but >>>DAMN do I have too swap the axle.......lol

nbpro

09-13-2010 07:17 PM

Re: 5 lug bolt patten

http://67-72chevytrucks.com/vboard/s...ight=6-lug+2WD dont no if this will help good luck

lolife99

09-13-2010 07:54 PM

Re: 5 lug bolt patten

Quote:

Originally Posted by mcrich01 (Post 4188422)

Thanks Bro for the info but >>>DAMN do I have too swap the axle.......lol

I think you can just swap the two axles out of a 4x4 rearend and slide them into your housing.

All times are GMT -4. The time now is 04:57 PM.