The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   Project NORUSH - 71 Build - Nothing but the Best (https://67-72chevytrucks.com/vboard/showthread.php?t=556146)

BogeyBoy82 12-13-2012 10:23 PM

Project NORUSH - 71 Build - Nothing but the Best
 
Always dreamed of building a 71/72 C10. Bought a 71 K5 2wd in July. Flipped it a couple months later. Bought a 70 half-done project. Flipped it 2 weeks later. Finally settled on what's described below.

She started out as a damn nice built '71 C-10 SWB with a 6.0 Swap and a half-resto done. Upone getting truck it was nice, but I wanted it perfect. I'm going for a Pro-Touring Cruiser that a 70 Year old or a 17 Year old would kill to have. Cory Scott with Kustom Werx in Conroe, TX is doing the build. He has built some of the baddest most recognized classic trucks in the Street Truck world for decades. You may not know his name but you would recognize his work. It's the best and it aint cheap lol.

My last name is RUSH hence NORUSH but truthfully build will be done in less than 6 more months (started 3 months ago). Literally not sparing any expense or cutting any corners. Suggestions are welcome b/c this is my first classic build.


List of Purchased Items:
  • 71 C-10 with LQ4 6.0 Swap Complete
    Full Pro-Touring Mild Coil-Over Front/Rear Porterbuilt Suspension
    Wilwood 6 Piston / 4 Piston Brakes
    New Sheetmetal
    Wood Bed kit
    Wood Wheel
    Hidden A/C System (behind Dash not Under)
    Rear Chrome Sport Bumper
    Classic Trim
    Custom Gas Tank
    New Smooth Tailgate (old one dented)
    Seat Belts
    Headliner

List of Work to Be Done:
  • Complete Frame Off - Off Frame now lol...
    Powdercoating of Entire Chassis/Suspension in Matte Wrinkle Black - Complete
    Body Work and Make Sheetmetal Flawless
    Lay Down a Perfect Paint job
    Re-Assemble, Install New Parts, Etc
    Re-Do Interior with custom door panels, bolstered Chevelle Bucket Seats (Black and Houndstooth), etc

Undecideds:
  • Wheels - Leaning Hard Towards Intro West Coast with Satin Finish Accents like the ones pictured below. 20/22x10 with nice fat lip on 315s or Maybe go 20x12 rear with 345s
    Paint Color - Was gonna classic Two-Tone White/Black. Then went to straight black. Now I'm 99% set on Chevelle Shadow Gray, maybe with black center two-tone but most likely solid...
    Rear End - To narrow or not to narrow. Already has a 3.73 with Posi in it.
    Motor Mods - L92 Heads, Cam, and Tune. Not sure if it truely needs it but would be the cherry on top.
    Wood Stain Color - Wanted to go classic chevy stain but thinking black stain or gray stain in bed with the wheel to match.

Obviously this aint everything but it's a damn good start. I'm really open to ideas and input since I'm going balls deep on my first classic build. I'm no foreigner to the modded Chevy world, but this territory is a little unfamiliar. Like I said this build should be one for the record books. I know a lot of these get started and never get done and are a lot more fluff than fact but no bull this is gonna be a good one fellas.

Pics so far....

As she started....
https://sphotos-b.xx.fbcdn.net/hphot...01652888_o.jpg

Rear Shot as she started...good pallet but not perfect lol....
https://sphotos-b.xx.fbcdn.net/hphot...41981356_o.jpg

LQ4 swap (6.0 like Ls2) already done. Runs great.
https://sphotos-a.xx.fbcdn.net/hphot...17499184_o.jpg

Have original un-cut dash going in and hidden a/c
https://sphotos-a.xx.fbcdn.net/hphot...93877923_o.jpg

Bench has gotta go...
https://sphotos-a.xx.fbcdn.net/hphot...20338210_o.jpg

Let the Madness Begin....
https://sphotos-b.xx.fbcdn.net/hphot...46400236_n.jpg

Oh hell...rip the motor out let's powdercoat everything....
https://sphotos-b.xx.fbcdn.net/hphot...71078852_n.jpg

No Turning Back now....
https://sphotos-a.xx.fbcdn.net/hphot...47830225_n.jpg

F me....
https://sphotos-b.xx.fbcdn.net/hphot...16280377_n.jpg

Wheels I'm leaning Hard toward. Like the Boss but the lip is tiny and want Billets. Kinda wanna do HRE but these have such a classic look to them and no one else really has done them yet...Wheels also kinda look like Old Chevelle SS Wheels and that's the theme I'm kinda going towards
http://i536.photobucket.com/albums/f...S/IMG_2481.jpg

99% Sure on this color. Chevelle Shadow Gray. Thought about some type of black stripe or accent to tie in theme more. Most likely nixing that idea..

http://www.classicmusclecars.com/ima...oom/1986_4.jpg

More Pics to Come....

BogeyBoy82 12-13-2012 10:29 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Spot Saver for Future Updated Pictures

RWB-713 12-13-2012 11:50 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Definitly following along, sounds like a great plan you have to start!
Posted via Mobile Device

Ghostryder79 12-14-2012 12:32 AM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Looks like an awesome build. If you weren't in TX, I'd be all over you trying to figure out how to pick up that seat

Chvy2NV 12-14-2012 01:49 AM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
cool build.. what are some of your plans for her..

trashmanryan 12-14-2012 03:33 AM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
:metal:I'm following this one
Posted via Mobile Device
Posted via Mobile Device

LEX 12-14-2012 07:33 AM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
I like your plan. I recognize that truck.
Posted via Mobile Device

67cheby 12-14-2012 06:37 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
NICE , i am in for the ride !

BogeyBoy82 01-20-2013 04:10 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Everything is back from powdercoat and being assmembled. Should be a roller by end of next week.


Went ahead and orderd the wheels on friday..

Billet Specialties Mag-G - 20x8.5 and 20x10. Gonna go 315/35 in rear. Wanted to go 12" wide but tire selection was crap and really wanted to not get too wild with it.


http://www.billetspecialties.com/ass...L59G_Mag-G.png

http://www.billetspecialties.com/ass...Mag-G-Side.png

BogeyBoy82 01-21-2013 08:31 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Ok some progress pics....Everything powdercoated textured matte black. Full Porterbuilt coilover and Wilwoods went on today.

http://sphotos-a.xx.fbcdn.net/hphoto...29600717_n.jpg

http://sphotos-a.xx.fbcdn.net/hphoto...59567590_n.jpg

CC69Rat 01-21-2013 09:21 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Subscribed. Nice build!

daves72C10D 01-21-2013 09:38 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Yea, it is really going to be nice.

BogeyBoy82 01-22-2013 04:47 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
I keep going back and forth between Chevelle Gray and my original plans....I'm 99.9% sure i'm going white/black/white/black two tone with trim. So torn. Love this truck below. It was my original inspiration for the build....

Take a look at this sucker. Truly a work of art if you haven't seen it

http://www.philferrarihotrods.com/pr...touring-pickup

STOCKISH 01-22-2013 05:25 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
This truck is going to be sick, Im a big fan of the two tone. Big Al 71, where ya at man, this is all you.

BogeyBoy82 01-22-2013 05:33 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Quote:

Originally Posted by 1972SuperCheyenne (Post 5835740)
This truck is going to be sick, Im a big fan of the two tone. Big Al 71, where ya at man, this is all you.


I tried to get Big Al to part with his before I started this lol. He keeps texting me white/black two tone pics to taunt/tempt me lol.

I want the full 71/72 trim no matter what paint choice I go but the choices are

1. Black/White Two Tone (roof white or black????)

2. All Shadow Grey (1970 Chevelle color above)

3. All Jet Black. (never gets old in my book)

effects66 01-22-2013 09:31 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Quote:

Originally Posted by BogeyBoy82 (Post 5830666)
Everything is back from powdercoat and being assmembled. Should be a roller by end of next week.


Went ahead and orderd the wheels on friday..

Billet Specialties Mag-G - 20x8.5 and 20x10. Gonna go 315/35 in rear. Wanted to go 12" wide but tire selection was crap and really wanted to not get too wild with it.


http://www.billetspecialties.com/ass...L59G_Mag-G.png

http://www.billetspecialties.com/ass...Mag-G-Side.png

Great looking build so far!!! Nice selection on the rims, I was debating on the exact same two for the past 6 months. Still havent made my mind up as of yet but have been leaning on the Billet Specialties for a bit now. My build is getting close that I will have to start to pick the wheels soon.


____________

My Build:

1970 C10, 550hp LSX:
http://67-72chevytrucks.com/vboard/s...d.php?t=556610

builtbyKane 01-23-2013 12:09 AM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Truck looked great to start. Can't wait to see the progress on this build.
Posted via Mobile Device

67cheby 01-23-2013 10:48 AM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
looking great so far !

RRC 01-23-2013 02:23 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Nice choice of wheels I was thinking about using those too. Can't wait to see them on your truck!!!
Posted via Mobile Device

BogeyBoy82 02-19-2013 03:54 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Wheels arrived today. Waiting on rubber and then the rolling chassis will be complete. The body is all prepped to be sprayed as well.

https://sphotos-a.xx.fbcdn.net/hphot...76299867_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...85328521_n.jpg

OTIS HURTS 02-19-2013 03:58 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
looks great

LEX 02-19-2013 04:08 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Nice

effects66 02-19-2013 04:44 PM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Quote:

Originally Posted by BogeyBoy82 (Post 5830666)
Everything is back from powdercoat and being assmembled. Should be a roller by end of next week.


Went ahead and orderd the wheels on friday..

Billet Specialties Mag-G - 20x8.5 and 20x10. Gonna go 315/35 in rear. Wanted to go 12" wide but tire selection was crap and really wanted to not get too wild with it.


http://www.billetspecialties.com/ass...L59G_Mag-G.png

http://www.billetspecialties.com/ass...Mag-G-Side.png

What backspacing did you go with

BogeyBoy82 02-20-2013 11:38 AM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
5.5 on rear I believe

Rusbuilt 02-20-2013 11:52 AM

Re: Project NORUSH - 71 Build - Nothing but the Best
 
Subscribed! Looking good sir!


All times are GMT -4. The time now is 06:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com