crew cab and four door guy HELP!!!!!!!!!
 

guys im way in over my head, and i need some help. im building my own 72 chevy crew cab, with a 1997 ram air lt1, paired with a 4l80 auto trans i'm useing my stock 205 transfer(after i rebuild it) and also useing my 12 bolt rear. im gearing it 3.73's any tips on that set up can help. But i need tips and help about building my cab. here is what i have so far. so if you have ever built, help build, know how to build or even have a book on 1967-72 crew cabs HELP!!!!!!!!!!!!!

photos
(1st) right after the cut. i left extra sheet metal i case i f^&k up
(2ed) whole 3 door cab soon to be forth door cab
(3ed) truck cab to cut and make cab back

Re: crew cab and four door guy HELP!!!!!!!!!
 

guys leave some feed back and i want to know what you think of the of the truck so please vote in the poll:fb:

Re: crew cab and four door guy HELP!!!!!!!!!
 

That's pretty much the same thing I am doing, but I am using the burb 4x4 frame, modifying it to fit crew cab and short bed, and using most of the drivetrain parts from a 89' FI 454 1 ton 4x4. Looks like you got the parts to do, just need to start. There's really only 2 builds to watch on this: Project Penicillen and Hart_Rod's crew cab build. The rest is your imagination. Trevor

Re: crew cab and four door guy HELP!!!!!!!!!
 

Try these.
http://67-72chevytrucks.com/vboard/s...d.php?t=226302

http://67-72chevytrucks.com/vboard/s...archid=1498091

http://67-72chevytrucks.com/vboard/s...hlight=crewcab

Re: crew cab and four door guy HELP!!!!!!!!!
 

I'm not sure what your specific question is, but I'll make 2 comments. First, you need to use the rounded door frames on the 3rd door (ie use the rear cab section from the truck). Second, in my opinion, you need to cut the 1" extra roof line out of the burb and use a "smooth" roof like the truck. If you have any more specific questions, take a look at my crewcab thread and then let me know. Good luck.

R/

Re: crew cab and four door guy HELP!!!!!!!!!
 

well i know hind sights 20/20 so is there any thing you wont do if you had to do it over again

Re: crew cab and four door guy HELP!!!!!!!!!
 

and does any on have and photos of a fourth door build?

Re: crew cab and four door guy HELP!!!!!!!!!
 

Here you go, post #88....

http://67-72chevytrucks.com/vboard/s...=188993&page=3

Re: crew cab and four door guy HELP!!!!!!!!!
 

Well on ours we kept the square 3rd door and i feel like it looks legit! A problem that we ran into was in the roof line being different so we had to graft in a little "spoiler" to make up for the difference! ill try and find some pics and post them.

Re: crew cab and four door guy HELP!!!!!!!!!
 

post #88? huh

Re: crew cab and four door guy HELP!!!!!!!!!
 

OOOPPPSSS!!! I forgot to post the link, here it is:

http://67-72chevytrucks.com/vboard/s...=188993&page=3

Re: crew cab and four door guy HELP!!!!!!!!!
 

ok i thanks for the help with the door but how do you go about takeing the 2 inchs out of the roof

Re: crew cab and four door guy HELP!!!!!!!!!
 

my frame

i plan to use my stock frame and add some extra frame form the parts truck does any body know what my wheel base should be for a short bed crew

Re: crew cab and four door guy HELP!!!!!!!!!
 

You'll have to cut the front burb roof off and reskin it with a piece from the rear.

My wheel base is 148". It all depends on how you set it up. What I would suggest to you is finish the rear cab section prior to building your chassis. Then mock up the bed and see where that puts you.

Re: crew cab and four door guy HELP!!!!!!!!!
 

im not sure on the roof do you have any photos of how you did it

Re: crew cab and four door guy HELP!!!!!!!!!
 

:burnout: bump

Re: crew cab and four door guy HELP!!!!!!!!!
 

I didn't build it, I bought it a couple of years ago (story in my build link below). The crew was built from a truck not a suburban. Whoever built it basically cut a truck cab in half and then added 33" in the center. Everything was fabbed, including both rear doors.

Re: crew cab and four door guy HELP!!!!!!!!!
 

Read through this build and it will give you plenty of info on the 4th door mod (along with the post and info that Rob linked above) and 1 way to get rid of the high roof crown.

http://67-72chevytrucks.com/vboard/s...d.php?t=306237 I will answer questions for you after you read the build thread and yes their will be a test :lol:

But first get the cab back in place and squared up before even thinking about cutting into the 4th door.


Kevin
LFD Inc.

Re: crew cab and four door guy HELP!!!!!!!!!
 

haha ok will do , is the test true false?:lol:

Re: crew cab and four door guy HELP!!!!!!!!!
 

Re: crew cab and four door guy HELP!!!!!!!!!
 

thanks for the words of wisdom. im checking, and double checking before any thing i do. i will post every question i have be for i make a move. and my shop has some good guys so i'm pretty sure we can do it.

Re: crew cab and four door guy HELP!!!!!!!!!
 

ttt for Updates??????

Re: crew cab and four door guy HELP!!!!!!!!!
 

these are awesome kuddos to yall buildin em i dont have that skill lol

Re: crew cab and four door guy HELP!!!!!!!!!
 

Its been almost two years sense you posted this thread, How about some updates with some pictures. Thanks.