292 Engine mount
 

Are the engine mounts the same on 292 as 250. I know the passenger frame mount is different. Thanks

Re: 292 Engine mount
 

The engine mounts themselves are the same '63-'72 for the 230,250, 292, 283, 307, 327 and 350's

Am I missing spacers or something? It likes about an inch being long enough to set on the perch.
Posted via Mobile Device

Re: 292 Engine mount
 

are you sure it is a 292??
ron

Positive
Posted via Mobile Device

Re: 292 Engine mount
 

show a picture of the mounting in question. it is either one way or the other.
ron

Re: 292 Engine mount
 

Do you have the brackets between the block and the engine mounts?

Re: 292 Engine mount
 

it sounds like someone using a 292 perch on a 230-250 eng. there are only 2 different perches in 2 wd and 2 different engine applications. if it don't match up with one it must be the other. there were no other options. he may be also trying to fit a gmc perch in there but do not know what that outcome would be but doubt that it would work.
ron

Re: 292 Engine mount
 

I had dramas with mine as somebody had butchered some BB mounts to fit the brackets for a 250. So when I put a V8 in it was about an inch out.

I got rid of it all and went for a tubular mount that moved the engine forward for the MSD cap.

Re: 292 Engine mount
 

but we so far can only go by the info that has been given and it is skimpy. n o one has mentioned anything other than a stock applications so far. he has been asked on 2 forums for pictures and hasn't done so yet. if pictures are given then the problem may be solved
ron