The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 4 of 184 123 4 567891454104 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today? Chapter II (https://67-72chevytrucks.com/vboard/showthread.php?t=612422)

jmorri34 01-28-2014 12:43 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by Elliot949 (Post 6494951)
Typically if you do it all at one time they will cut the deal... I was quoted 125 for fenders and grill and 150 for the hood but they did all 4 pieces for 300...
I dont think there is a media blaster around the spring tx area where I live or I would, plus the whole truck has to be strippd and I think by using a little elbow grease I should be able to do it myself. Although sure would be easier to have it blasted, as well as cleaner!

jmorri34 01-28-2014 12:43 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by Ridgeclimber (Post 6494679)
The aircraft stripper I used worked pretty good. I roughed up the paint with 40 grit just to open up the paint to let the stripper soak in. I had about three coats of old paint on. So it took a coat of stripper for each coat of old paint. Once I scrapped off as much as I could I used 80 grit to remove the rest. Like the previous post said, be careful with it. It will eat through light latex gloves, your clothes et,. were goggles, use in well ventilated area and/or use a respirator.
Awesome thanks for the information, I have a bit till I have to get to it but this will help

9teen69 01-28-2014 01:53 PM
Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
New u-joints and carrier bearing. Should have bought a puller($30)...local brake shop pulled it off and stripped out my threads...now I know why they didn't charge me. $65 later at Scottys Driveshaft fixed the problem...they are the best.

Whooped my butt for awhile...as always the search button was most helpful.

54blackhornet 01-28-2014 02:43 PM
Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Got my wheels back from powder-coating, they look a lot cleaner now !:metal:

OregonNed 01-28-2014 04:37 PM
Re: What did you do to your truck today? Chapter II
 
I test fitted my new seat and figured our how far up I needed to mount my floor shift:

http://i1320.photobucket.com/albums/...psa63c32a8.jpg

Then removed it and began the fat mat installation:

http://i1320.photobucket.com/albums/...pscb1da9c9.jpg

Then laid the new carpet in to test fit:

http://i1320.photobucket.com/albums/...ps5784b7c9.jpg

VWNate1 01-28-2014 10:49 PM
Re: What did you do to your truck today? Chapter II
 
Be aware that media blasting creates heat and can warp panels WAY beyond salvage ~ I've seen this happen many times , even though the company said " yeah , yeah ~ we've been doing this for 20 years and never ruined a panel yet " .

Once your original panels are ruined , you're going to wish you'd chem stripped instead .

Mike_The_Grad 01-31-2014 12:20 PM
Re: What did you do to your truck today? Chapter II
 
3 Attachment(s)
This was 2 days ago. My first successful engine/trans pull. Had a couple buddies with a lot more experience than me, over to help. And I'm very glad they showed up. Saved me from making a very time consuming mistake since I was going to just yank the distributor out without finding tdc on #1 piston! Now begins the fun part! CLEANING! then paint. Also found out my timing chain cover is missing my degree timer. So now I gotta pull balancer and water pump.just one more thing to do... but it needs to be done. Might as well do it while its out in the open. I'm really excited to see how this is all gonna turn out. More pics soon to come

VWNate1 01-31-2014 03:11 PM
Re: What did you do to your truck today? Chapter II
 
Grimy but not really bad , it'll look great when you're finished .

Did you remove the entire front clip as one piece ? .

texjake 01-31-2014 09:16 PM
Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
My Flowmasters came in today & got them installed. It sounds so much better now! And yes my interior is still gutted, waiting on parts to come in. :chevy:

BugzC10 01-31-2014 09:54 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by texjake (Post 6501696)
My Flowmasters came in today & got them installed. It sounds so much better now! And yes my interior is still gutted, waiting on parts to come in. :chevy:
Which one did you get and how bout a sound clip / video.

ole dollor 01-31-2014 09:58 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by texjake (Post 6501696)
My Flowmasters came in today & got them installed. It sounds so much better now! And yes my interior is still gutted, waiting on parts to come in. :chevy:
need to drop by and see what you have done so far.....how far away are you from street use ... ole dollor is at the trans shop fixing a small drip right now...took her today and will try and pick her up on Monday..

texjake 02-01-2014 02:02 AM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by BugzC10 (Post 6501771)
Which one did you get and how bout a sound clip / video.
I got the 40 series & its not as loud as I thought it was going to be. I don't know if it's because I've got a long bed & the fact I'm running them all the way out back & didn't center dump them. I just know they sound better than the Flo-Pro's the PO had installed on the truck. And I don't get any drone in the cab either. In fact I can't really hear them until I step out of the cab & walk back towards the rear of the truck. I'll try to get a sound/video clip tomorrow. :chevy:

texjake 02-01-2014 02:22 AM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by ole dollor (Post 6501783)
need to drop by and see what you have done so far.....how far away are you from street use ... ole dollor is at the trans shop fixing a small drip right now...took her today and will try and pick her up on Monday..
Hey, Ole, I'm still far away from being street ready, since the weather wont co-operate & Ive got my dash & interior gutted out & still waiting on interior parts. I took a big chance today and drove it across town to the muffler shop get my Flowmasters installed. And the weather doesn't look to be any better next week either, I'll sure be glad when Spring gets here. :chevy:

BugzC10 02-01-2014 08:47 AM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by texjake (Post 6502139)
I got the 40 series & its not as loud as I thought it was going to be. I don't know if it's because I've got a long bed & the fact I'm running them all the way out back & didn't center dump them. I just know they sound better than the Flo-Pro's the PO had installed on the truck. And I don't get any drone in the cab either. In fact I can't really hear them until I step out of the cab & walk back towards the rear of the truck. I'll try to get a sound/video clip tomorrow. :chevy:
Running them out the back is exactly why they don't sound as loud as dumping them under the bed/axle. I have the 40s dumped under bed. Love the cam sound with the dual exhaust at idle, but wonder if it is going to be annoying while cruising. (haven't driven er much)
Sounds like you might mis that rumble under the truck...:lol:

tomshortwide69 02-01-2014 12:49 PM
Re: What did you do to your truck today? Chapter II
 
http://170

texjake 02-01-2014 03:32 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by BugzC10 (Post 6502275)
Running them out the back is exactly why they don't sound as loud as dumping them under the bed/axle. I have the 40s dumped under bed. Love the cam sound with the dual exhaust at idle, but wonder if it is going to be annoying while cruising. (haven't driven er much)
Sounds like you might mis that rumble under the truck...:lol:
I am sure it will get louder the more I drive it. I'm not sure I'll miss the done or rumble. I plan on taking it on some long road trips & don't want to be droned out by the time I get to my destination. Out here where I live it's a good 45 miles between towns & nothing much in between. So that's a long trip of being constantly droned out on the highway. :chevy:

Lou Boffa 02-01-2014 05:55 PM
Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
couldn't help it. I'm a sucker for truck bling. Installed core support filler plates.

ole dollor 02-01-2014 06:38 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by Lou Boffa (Post 6503027)
couldn't help it. I'm a sucker for truck bling. Installed core support filler plates.
your bling looks really good...I like it. nice truck also.

Econman 02-01-2014 06:54 PM
Re: What did you do to your truck today? Chapter II
 
Haven't worked on it today. The rolling chassis is completed (rebuilt rears, new suspension, all grade 8 stainless hardware, stainless brake lines, stainless fuel lines, everything powder coated including rally wheels.

Engine block, crank, rods/pistons and heads all in the machine shop. Just waiting to get them back to start building the engine back...

I discovered a '72 Super C20 today. Was sold to a recycling center for scrap metal. Complete truck. Quite a bit of rust, but otherwise pretty straight. Camper Special with dual tanks. I'm hoping to buy the door panels out of it - they're in nice condition with wood grain inserts. If it isn't bought soon, I guess it will be crushed. It's been parked adjacent to the crusher awaiting a possible buyer for several months.

Lou Boffa 02-01-2014 07:25 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by ole dollor (Post 6503074)
your bling looks really good...I like it. nice truck also.
Thanks Dollar. Long steppers rock.

Lanman1972 02-01-2014 08:29 PM
Re: What did you do to your truck today? Chapter II
 
3 Attachment(s)
I made a sign to light up the Truck's side of the garage. Laser cut 1/8" aluminum plate, translucent acrylic, with LED backlight. Orange/White/Orange to match the truck.

ole dollor 02-01-2014 08:56 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by Lanman1972 (Post 6503232)
I made a sign to light up the Truck's side of the garage. Laser cut 1/8" aluminum plate, translucent acrylic, with LED backlight. Orange/White/Orange to match the truck.
now that's a cool sign...like it

texjake 02-01-2014 10:04 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by BugzC10 (Post 6501771)
Which one did you get and how bout a sound clip / video.
Here is a video clip. The clip may not be very loud, it's iPhone video quality if you know what I mean. I know it's not super loud but sure sounds a heck of a lot better than what the PO had on there. https://www.youtube.com/watch?v=t8QrWmi9pps :chevy:

magwakeenercew2jh 02-01-2014 10:49 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by texjake (Post 6503429)
Here is a video clip. The clip may not be very loud, it's iPhone video quality if you know what I mean. I know it's not super loud but sure sounds a heck of a lot better than what the PO had on there. https://www.youtube.com/watch?v=t8QrWmi9pps :chevy:
Your sound is amazingly consistent with the 300hp 350, 2.5" pipes into two 40 series Flowmasters that made this sound on the last truck of mine (a '72).

https://www.youtube.com/watch?v=OxRy_sAmJYo



Just because...long story...I'm running 2.25 inch pipes thru the same series Flowmaster mufflers (also all the way out the back) on the current
build, RAT. I don't have a sound clip, but the 350 in RAT is way less cammed up. It makes far less noise. To me, that's unfortunate. :lol::lol:

I did use an extremely heavy dose of sound deadener in RAT. So, we'll see what happens to the sound inside the cab with the 2.25" pipes after
the motor work.

texjake 02-01-2014 10:56 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by magwakeenercew2jh (Post 6503504)
Your sound is amazingly consistent with the 300hp 350, 2.5" pipes into two 40 series Flowmasters that made this sound on the last truck of mine (a '72).

https://www.youtube.com/watch?v=OxRy_sAmJYo



Just because...long story...I'm running 2.25 inch pipes thru the same series Flowmaster mufflers (also all the way out the back) on the current
build, RAT. I don't have a sound clip, but the 350 in RAT is way less cammed up. It makes far less noise. To me, that's unfortunate. :lol::lol:

I did use an extremely heavy dose of sound deadener in RAT. So, we'll see what happens to the sound inside the cab with the 2.25" pipes after
the motor work.
The link to your video is set to private and I cannot play it. :chevy:

magwakeenercew2jh 02-01-2014 11:01 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by texjake (Post 6503517)
The link to your video is set to private and I cannot play it. :chevy:
Thanks. Should be fixed now......Sorry.

88fordf150 02-02-2014 12:04 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by Lanman1972 (Post 6503232)
I made a sign to light up the Truck's side of the garage. Laser cut 1/8" aluminum plate, translucent acrylic, with LED backlight. Orange/White/Orange to match the truck.
Cool project!

Burgie70 02-02-2014 05:26 PM
Re: What did you do to your truck today? Chapter II
 
I put on a new fuel pump. What a pain trying to keep that rod up in there and get the gaskets situated. Required another set of hands from my friend. Now I know why people go with an electric one.:lol:

Bob B. 02-02-2014 06:41 PM
Re: What did you do to your truck today? Chapter II
 
Went for a drive, gassed it up, and washed it!

BugzC10 02-02-2014 07:10 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by texjake (Post 6503429)
Here is a video clip. The clip may not be very loud, it's iPhone video quality if you know what I mean. I know it's not super loud but sure sounds a heck of a lot better than what the PO had on there. https://www.youtube.com/watch?v=t8QrWmi9pps :chevy:
Sounds like a healthy Chevy "BIG" Block....:metal:

9teen69 02-02-2014 11:02 PM
Re: What did you do to your truck today? Chapter II
 
3 Attachment(s)
About half way done with PS conversion. Pulleys, gearbox, pitman arm installed. Pump painted and rebuilt. I like the way TXfirefighter painted his, wish it was powder coated but rattle can will do. I did have my pulleys power coated 60% gloss.

Sorry keeps flipping photos.

Ridgeclimber 02-02-2014 11:19 PM
Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Last weekend I finish stripping three layers of the old paint off of my hood and front fenders. We then finished of fixing a couple of dents on the hood and one fender. Prepped and primed the hood and fenders yesterday. Today I stripped the grill. Oh ya and I picked up my new billet aluminum dash panel and glove box door from one of the forum members. Looks good with the new auto meter gauges I picked up aswell.

Ridgeclimber 02-02-2014 11:27 PM
Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Here's another picture of aluminum dash panel and glove box cover I picked up.

Mike_The_Grad 02-03-2014 02:24 AM
Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
@vwnate1 no, I removed pieces individually because I needed to replace driver side outer fender. I have three days of cleaning so far and need at least one more before paint.I "rented" an engine hoist from my mechanic for the price of a case of beer.when I returned it to him he told me about a 350 with a hot cam, edlebrock performer intake, h.e.I. distributor, and a edlebrock 750 carb, which is what i was gonna do to mine.it's in a '78 nova. It runs and said I could have the motor for $600. I planned on spending at least that much on my current 350.so I gotta jump on it. Just waiting for uncle Sam to return the money he "borrowed" from me. Some pix of work so far:

ekgguy 02-03-2014 01:27 PM
Re: What did you do to your truck today? Chapter II
 
Drove it to a friends Superbowl party. Spent most of the evening talking about trucks and watching commercials instead of the game.

heathbirkendahl 02-03-2014 02:06 PM
Re: What did you do to your truck today? Chapter II
 
Having a new windshield installed. Used the old stock stainless and a new (Precision Brand) seal and windshield without the shading across the top.

It went in like a breeze and no rust!!

Today was a good day!! (and, I didn't even use my aka...Ice Cube)

BugzC10 02-07-2014 12:09 PM
Re: What did you do to your truck today? Chapter II
 
TTT...:ito:

Elliot949 02-07-2014 12:12 PM
Re: What did you do to your truck today? Chapter II
 
Went to the Body shop and looked at "Class Act" my 67 Chevy....

Lou Boffa 02-07-2014 12:18 PM
Re: What did you do to your truck today? Chapter II
 
Changed oil and filter. Scrapped, sprayed and cleaned 40 years of road gunk while I was under there.

BugzC10 02-07-2014 12:30 PM
Re: What did you do to your truck today? Chapter II
 
Quote:
Originally Posted by Elliot949 (Post 6513075)
Went to the Body shop and looked at "Class Act" my 67 Chevy....
Pictures??!!


All times are GMT -4. The time now is 09:05 AM.
Page 4 of 184 123 4 567891454104 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com