Gas tank relocation ( fleetside )
Hello all
I have been viewing thread(s) on here for some time now Seen some great idea(s) but something still feels like its missing . . . Looking to relocate my tank to the rear but dont want it to not show past the rear bumper Also see some modifications at where the tank was installed almost by the back of the cab underneath and by the trailing arm support using a 65/ 66 mustang tank . Does any one have any insight or foto(s) of current or past mods that were done in relocating the tank ? |
Re: Gas tank relocation ( fleetside )
I too wanted a rear tank that didn't show....so I started this thread http://67-72chevytrucks.com/vboard/s...d.php?t=621177 and I found it.
|
Re: Gas tank relocation ( fleetside )
Noticed as well , interchanging jeep components is being used a bit on these older model c10(s) . . .
|
Re: Gas tank relocation ( fleetside )
3 Attachment(s)
Here's nine. Early mustang tank I mounted between the frame rails
|
Re: Gas tank relocation ( fleetside )
1 Attachment(s)
|
Re: Gas tank relocation ( fleetside )
Any foto(s) of the plumbing ran ?
Like the idea tho ( using the reverse light housing as a filler ) |
Re: Gas tank relocation ( fleetside )
1 Attachment(s)
Attachment 2062136
Used the side fill. Had to run rubber vent tubing up & over the wheel well on both sides to be able to vent when filling at the gas station. |
Re: Gas tank relocation ( fleetside )
Boyd Welding is what I used. Unless you on your knees you dont see it. I also got it black powder coated.
Jimmy |
Re: Gas tank relocation ( fleetside )
1 Attachment(s)
Tanks Inc universal tank. Doesn't show below bumper. Two optional fill locations.
https://www.tanksinc.com/index.cfm/p...rod/prd121.htm |
Re: Gas tank relocation ( fleetside )
1 Attachment(s)
Here's mine for Fuel Injection Engine.. It's a 1995 Roadmaster Tank, Hanger and Hardware.. 22 Gallons and Plastic will out last the truck.lol.
|
Re: Gas tank relocation ( fleetside )
Bigmoe, 66shortbed, can you show how you plumbed your gas tank. Assume they are both side fill tanks?
|
Re: Gas tank relocation ( fleetside )
2 Attachment(s)
Using a Rick's VaporWorx tank on my 66 fleetside. I did a bed fill for my swap.
|
Re: Gas tank relocation ( fleetside )
Quote:
|
Re: Gas tank relocation ( fleetside )
1 Attachment(s)
Quote:
|
Re: Gas tank relocation ( fleetside )
1 Attachment(s)
Found a picture of my tank installed. Tanks Inc. USPT-GH. (the vent was moved higher within the fender once the box was installed.)
|
Re: Gas tank relocation ( fleetside )
You ran the fill tube thru the frame?
|
Re: Gas tank relocation ( fleetside )
Quote:
|
All times are GMT -4. The time now is 01:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com