The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)
-   -   Shackle to Gas Line Interference (https://67-72chevytrucks.com/vboard/showthread.php?t=438127)

RSHugger 12-31-2010 05:06 PM

Shackle to Gas Line Interference
 
I have searched and found several folks talking about the problem but have not seen too many solutions on how to re-route the gas fill line after putting in the 2 inch drop shackle on a 77 2WD Blazer. I put in new springs along with the drop and the shackle is dead center on the fill line (removed right now)... I have not looked at what changes to make yet to make this work but thought I would check with the Brain Trust here on the Forum. Rotate the gas neck 30 degrees? Just looking for ideas.

Thanks and have a great 2011!!

Roger

tobiahr 01-01-2011 03:11 AM

Re: Shackle to Gas Line Interference
 
I couldn't find the original thread but I'm pretty sure BRUISER had a muffler shop make a bent piece that would route the neck past the shackle. I've also heard you can loosen the flexible part and twist it so it just clears.

RSHugger 01-02-2011 11:33 PM

Re: Shackle to Gas Line Interference
 
Thank you for the response... gives me some ideas. I will look it over more the next time I crawl under the truck. Never as easy as you think/hope. I have been doing this enough years to know better but I am an optimist and always hoping for the easy solution :lol:

68Timber 01-03-2011 12:26 AM

Re: Shackle to Gas Line Interference
 
I had a friend reroute the filler neck. He worked in a muffler shop back when he was a young buck, but that was a long time ago. Still, he worked and welded sections until it all cleared and was leak-proof.

Link with pictures here: http://67-72chevytrucks.com/vboard/s...d.php?t=313319

tobiahr 01-03-2011 12:37 AM

Re: Shackle to Gas Line Interference
 
Bruiser, thanks for jumping in. I had searched for that thread and found my google skills were lacking.


All times are GMT -4. The time now is 10:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com