The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - GA parting out 71 c10 (https://67-72chevytrucks.com/vboard/showthread.php?t=820518)

heehawracing

04-09-2021 10:31 AM

parting out 71 c10

4 Attachment(s)

parting out cab 1000.00
doors 150.00 each rust in the bottoms
door panels 100.00 shipped
parting out the complete truck will sell the complete cab doors and fenders it runs and drives 7704687776

pjmoreland

04-09-2021 10:55 AM

Re: parting out 71 c10

I'm interested in the engine harness that goes from the firewall to the distributor and starter if the wires are good.

72 Super

04-09-2021 12:17 PM

Re: parting out 71 c10

Are the fenders good, any rust?

Thanks,
Ray

heehawracing

04-09-2021 12:54 PM

Re: parting out 71 c10

Quote:

Originally Posted by pjmoreland (Post 8905886)

I'm interested in the engine harness that goes from the firewall to the distributor and starter if the wires are good.

its no good

heehawracing

04-09-2021 12:55 PM

Re: parting out 71 c10

Quote:

Originally Posted by 72 Super (Post 8905921)

Are the fenders good, any rust?

Thanks,
Ray

normal rust driver side has a dent

rjw	04-12-2021 06:13 PM

Re: parting out 71 c10

Interested in drive shaft including center bearing bracket
Condition ?
Long wheelbase?
Price to 13108
Thanks Bob

heehawracing

04-12-2021 07:09 PM

Re: parting out 71 c10

Quote:

Originally Posted by rjw (Post 8907403)

Interested in drive shaft including center bearing bracket
Condition ?
Long wheelbase?
Price to 13108
Thanks Bob

there in stock condition the truck ran and drove but not sure if in will need u joints and midshaft bearing 200.00 shipped

maverickmk

04-14-2021 07:57 AM

Re: parting out 71 c10

What motor does it have? If a V8, how much?

heehawracing

04-14-2021 08:15 AM

Re: parting out 71 c10

Quote:

Originally Posted by maverickmk (Post 8908194)

what motor does it have? If a v8, how much?

350 500.00

heehawracing

04-14-2021 08:17 AM

Re: parting out 71 c10

Quote:

Originally Posted by heehawracing (Post 8908202)

350 500.00

i have 3 350 engines and a 305 and one 307

rjw	04-14-2021 10:10 AM

Re: parting out 71 c10

Quote:

Originally Posted by heehawracing (Post 8907436)

there in stock condition the truck ran and drove but not sure if in will need u joints and midshaft bearing 200.00 shipped

I'll take it
Send me your PayPal info
Thank you
Bob

heehawracing

04-14-2021 12:57 PM

Re: parting out 71 c10

Quote:

Originally Posted by rjw (Post 8908257)

I'll take it
Send me your PayPal info
Thank you
Bob

my paypal is heehawracing@bellsouth.net
thanks

bigmac73

04-15-2021 05:22 PM

Re: parting out 71 c10

1 Attachment(s)

looking for frame exhaust brackets

Rods	04-16-2021 09:18 AM

Re: parting out 71 c10

Price and condition of the gun rack.

FL71C10

04-17-2021 11:03 PM

Re: parting out 71 c10

Got any working horns?

heehawracing

04-18-2021 07:13 AM

Re: parting out 71 c10

Quote:

Originally Posted by FL71C10 (Post 8909894)

Got any working horns?

i have some i just pulled of im going to test them soon ill let you know

Accelo

04-18-2021 09:40 AM

Re: parting out 71 c10

interested in the Lower hood latch and Grill Center Support.
Am also interested in the 12pt bolts for the lower hood latch.

heehawracing

04-18-2021 11:00 AM

Re: parting out 71 c10

Quote:

Originally Posted by Accelo (Post 8909980)

interested in the Lower hood latch and Grill Center Support.
Am also interested in the 12pt bolts for the lower hood latch.

i have all that 80.00 shipped

Accelo

04-19-2021 01:18 AM

Re: parting out 71 c10

Quote:

Originally Posted by heehawracing (Post 8910029)

i have all that 80.00 shipped

I am also in need of the two rods that support the bed side just in front of the rear tires. Do you have them. I have a swb but i think they are the same as a LWB.
Rick

heehawracing

04-19-2021 01:13 PM

Re: parting out 71 c10

[QUOTE=Accelo;8910390]I am also in need of the two rods that support the bed side just in front of the rear tires. Do you have them. I have a swb but i think they are the same as a LWB.
Rick[/
i dont have any rods

pgnavy

04-20-2021 07:07 AM

Re: parting out 71 c10

Hi, power brake booster, bracket, rod? thank you

FL71C10

04-20-2021 09:27 AM

Re: parting out 71 c10

Quote:

Originally Posted by heehawracing (Post 8909945)

i have some i just pulled of im going to test them soon ill let you know

Any word on the horns?

heehawracing

04-20-2021 10:01 AM

Re: parting out 71 c10

Quote:

Originally Posted by FL71C10 (Post 8910874)

Any word on the horns?

so far all of them just click

FL71C10

04-20-2021 10:21 AM

Re: parting out 71 c10

Thanks for checking. I have 2 that don't do anything, and 2 that sound like a wounded duck.

All times are GMT -4. The time now is 09:31 AM.