67-72 4x4 LS swap crossmember
 

Are these the only 2 options?

https://www.ecautoandironfabrication...ap-crossmember

https://www.dirtydingo.com/shop/mobi...oducts_id=1408

Re: 67-72 4x4 LS swap crossmember
 

According to this post there is another option.

http://67-72chevytrucks.com/vboard/s...9&postcount=74

This is an old thread has anyone done this more recently? Pictures would be great!

Re: 67-72 4x4 LS swap crossmember
 

Here’s another option.

https://diy4x.com/product.php?produc...cat=252&page=1

Re: 67-72 4x4 LS swap crossmember
 

This one is nice. I like the removable lower section. Think it is designed for the original motors though. Using with an LS may require adapters and more fabrication. If i would have seen it would have used it over the Pacific Fab member I have in my truck. Would make a few changes as I have the tools.

The ECAuto crossmember is the Pacific fab crossmember used in my truck, just not powder coated. Not a fan of the Dirty Dingo crossmember myself. Though many are good with it.

That Jegs crossmember is interesting. While $100 now it would be a good starting point for an engine mount. More fabrication than others but doable for me.

Re: 67-72 4x4 LS swap crossmember
 

Richard, my assessment is the same. I emailed diy4x for some more info - hopeful they can make it work for the ls.

Re: 67-72 4x4 LS swap crossmember
 

Also I want my k5 at stock height. So my only options are dirty dingo or make my own.

Re: 67-72 4x4 LS swap crossmember
 

1 more option. Rtech, they sell a trans mount too.

https://rtechfabrications.com/produc...e-crossmember/