Wipers go backward
So I was finally able to connect the battery to my newly restored 70 C10. I was ops checking some of the electrical since I re wired the entire truck using an American autowire updat kit. I had left my wiper arms off until I could make sure they were parked. Well when I turn them on they turn in the direction of moving the wiper down then come back and park. Is it possible I wired it backwards or maybe could I have put the control rods in wrong? Maybe the arm that connects the push rods to the motor? Any help would be great. Thanks!
|
Re: Wipers go backward
1 Attachment(s)
The arm that connects to the motor should be pointing toward the driver side when parked, and so should the other two arms. Here's a photo of the motor arm.
|
Re: Wipers go backward
2 Attachment(s)
And here are photos of the other two arms.
|
Re: Wipers go backward
Quote:
|
Re: Wipers go backward
So I checked and the arm was on wrong. Flipped it around and all is good now. Thanks!
|
Re: Wipers go backward
Just getting ready to install my arms. Thanks as you saved me from making the same mistake.
:) Rick |
All times are GMT -4. The time now is 09:23 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com