The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - MA WTB 292 Air Cleaner Housing (https://67-72chevytrucks.com/vboard/showthread.php?t=811789)

NewBayColony

09-11-2020 08:54 AM

WTB 292 Air Cleaner Housing

Looking to buy an air filter housing for a 292. I really just need the lower part that the filter sits in. Must be for a 292 as the 250's are shorter. Thanks!

Classic Bowties

09-12-2020 12:01 AM

Re: WTB 292 Air Cleaner Housing

5 Attachment(s)

If you are unsuccessful in locating the lower filter housing by itself, we have this complete 292 air cleaner setup available. This setup was removed from a 72 Chevy C/30 with 292 I-6, only offering complete as pictured with upper offset lid, lower filter housing, carb to lid spacer/riser, lower block to housing support rod bracket and carb to upper lid stud. If interested, funds can be sent via paypal, check or money order, if using paypal option add 3%. Thanks, Mel :chevy:
.
***After letting the offer ride out for a few days over the weekend, we have listed/offered this 292 air cleaner setup in a parts board F/S thread, if you change your mind feel free to post interest in the below linked thread.***

http://67-72chevytrucks.com/vboard/s...d.php?t=811934
.

NewBayColony

09-12-2020 07:38 AM

Re: WTB 292 Air Cleaner Housing

Thanks, If I can't find just the part I need, I'll get in touch with you.

old51sedan

09-12-2020 09:13 AM

Re: WTB 292 Air Cleaner Housing

Quote:

Originally Posted by NewBayColony (Post 8806447)

Looking to buy an air filter housing for a 292. I really just need the lower part that the filter sits in. Must be for a 292 as the 250's are shorter. Thanks!

I have just changed my truck from a 250 to a 292, I have a few of these air cleaners and I believe they may be the same. The block on the 292 is taller, but the heads are both the same and the manifolds bolt to the head. I may be wrong on this and if I am someone will probably say so. If I'm right it will make your hunt a lot easier.

NewBayColony

09-12-2020 09:46 AM

Re: WTB 292 Air Cleaner Housing

The air filter housing is a couple of inches taller as the filter itself is taller by 2.40 inches. In a Fram filter, the 250 takes a CA189 and the 292 takes a CA192.
If you have a lower housing for a 292, I'm interested!

old51sedan

09-13-2020 09:26 AM

Re: WTB 292 Air Cleaner Housing

Quote:

Originally Posted by NewBayColony (Post 8806962)

Interesting, were never to old to learn something new. Anything I have would be complete also.

NewBayColony

09-14-2020 06:49 AM

Re: WTB 292 Air Cleaner Housing

Quote:

Originally Posted by old51sedan (Post 8807420)

Interesting, were never to old to learn something new. Anything I have would be complete also.

What would you want for a complete set up?

old51sedan

09-15-2020 09:05 AM

Re: WTB 292 Air Cleaner Housing

Quote:

Originally Posted by NewBayColony (Post 8807830)

What would you want for a complete set up?

I still have a few six cylinders, so not wanting to sell anything yet.

NewBayColony

09-15-2020 10:13 AM

Re: WTB 292 Air Cleaner Housing

Quote:

Originally Posted by old51sedan (Post 8808377)

I still have a few six cylinders, so not wanting to sell anything yet.

OK Thanks!

All times are GMT -4. The time now is 02:46 PM.