New dip stick
Anybody know where I can get a stock Chevy dip stick for a 350?
All I have found in the local parts houses are "close" to being right or cut to fit. TIA, Kevin D |
Re: New dip stick
Does it have a driver's side dip stick or passenger side one? I got a driver's side one from the local chevy dealer, which fit way better than anything I have seen aftermarket.
|
Re: New dip stick
Drivers side. Might have to stop by the dealer.
|
Re: New dip stick
I'll toss in another vote for getting it at the dealer; cheap and fits like it's supposed to.
|
Re: New dip stick
Do you have a part #? Dealer says it’s too old to look up
Posted via Mobile Device |
Re: New dip stick
It's 2 pieces, hope these help
Item Oil Tube (GM # 12337946) Gauge Assembly (Dip Stick GM # 3981019) |
Re: New dip stick
Quote:
|
Re: New dip stick
For those that have the dip stick on driver's side of engine. The hole sizes are different than the ones on the passenger side. Not sure what the cutoff year was for the changeover
|
Re: New dip stick
Quote:
|
Re: New dip stick
Quote:
|
Re: New dip stick
If you install a crate engine and use the driver-side dipstick, be sure to correctly plug the hole on the passenger side or you'll have yourself the rare "continuous oil-mist undercarriage rust inhibitor" option installed. The plastic shipping plug is not all that is required. Ask me how I know. And be sure to do this when building the engine on the stand. Before the exhaust manifolds are on.
PO install, by the way... heh. |
Re: New dip stick
Local dealer doesn't have one in stock and says he can't order it because it is discontinued. Can anyone recommend another source?
|
Re: New dip stick
try ebay
|
Re: New dip stick
These might be worth a try. Neither one is chrome.
https://www.summitracing.com/parts/s...make/chevrolet https://www.summitracing.com/parts/m...et?prefilter=1 Found this GM tube, but not a dipstick: https://www.summitracing.com/parts/n...6870/overview/ |
Re: New dip stick
73-79 350 older factory motor dipstick on pass side.
Try motor rebuilder shop local. just tell them what year motor and side dipstick you have Oh and if you changed your bottom end, oil pump, oil pan bigger, or deeper if not stock. |
All times are GMT -4. The time now is 12:27 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com